motor Archives - Page 18 of 30 - Use Arduino for Projects

Design and Implementation of an Arduino-Based Solar Tracking System

1. Introduction (1) Purpose A conventional solar panel typically converts only 30 to 40 percent of incident solar irradiation into electrical energy. To ensure a consistent output, an automated system capable of continuously adjusting the solar panel’s orientation is necessary. Addressing this need, the Sun Tracking System (STS) was developed as a prototype solution. This […]

Design and Implementation of an Arduino-Based Solar Tracking System Continue Reading

Arduino’s Dynamic Drive: Exploring 6 Projects with Motor Magic

Motor Projects / By Ibrar Ayyub

Choosing the Right Arduino Motor This guide on Arduino motors aims to provide fundamental information essential for selecting a motor for your project. If you’ve been engaged in DIY electronics for some time and feel confident in your skills, you might be seeking a more challenging and rewarding experience by venturing into larger, more sophisticated

Arduino’s Dynamic Drive: Exploring 6 Projects with Motor Magic Continue Reading

Mastering Motor Control: 6 Innovative Arduino Projects

Motor Projects / By Ibrar Ayyub

Choosing the Right Arduino Motor In this guide on Arduino motors, we’ll delve into fundamental details essential for selecting the right motor for your specific project. If you’ve been immersed in the realm of DIY electronics for some time, feeling assured of your skills, you might be seeking a greater challenge and a more fulfilling

Mastering Motor Control: 6 Innovative Arduino Projects Continue Reading

A GENERAL-PURPOSE PID CONTROLLER

Arduino News / By Ibrar Ayyub

For those new to fields like robotics or aerospace, it can seem at first glance that a problem like moving a robot arm or flying an RC airplane might be simple problems to solve. It turns out, however, that control of systems like these can get complicated quickly; so much so that these types of

A GENERAL-PURPOSE PID CONTROLLER Continue Reading

Sound Off: Silencing Noise Pollution with Arduino and IoT

Sound – Audio Projects / By Ibrar Ayyub

Increasing noise levels have become a major issue in many urban areas today due to factors like population increases, urban development, and technological advancements. Moreover, excessive noise from a neighbor or colleague can seriously impact one’s well-being and quality of life. Conversations conducted at high volumes in office settings are understandably disruptive. Having a coworker

Sound Off: Silencing Noise Pollution with Arduino and IoT Continue Reading

ARDUINO STICKER DISPENSER SAVES TIME

Arduino News / By Ibrar Ayyub

What’s the worst part about packaging up a whole lot of the same basic thing? It might just be applying the various warning stickers to the outside of the shipping box. Luckily, [Mr Innovative] has built an open-source automatic sticker dispenser that does the peeling for you, while advancing the roll one at a time quite satisfyingly.

ARDUINO STICKER DISPENSER SAVES TIME Continue Reading

AN OPEN-SOURCE EBIKE MOTOR CONTROLLER

Arduino News / By Ibrar Ayyub

DIY e-bikes are often easy to spot. If they’re not built out of something insane like an old washing machine motor, the more subtle kits that are generally used still stand out when compared to a non-assisted bike. The motors tend to be hub- or mid-drive systems with visible wires leading to a bulky battery,

AN OPEN-SOURCE EBIKE MOTOR CONTROLLER Continue Reading

AUTONOMOUS WHEELCHAIR LETS JETSON DO THE DRIVING

Arduino News / By Ibrar Ayyub

Compared to their manual counterparts, electric wheelchairs are far less demanding to operate, as the user doesn’t need to have upper body strength normally required to turn the wheels. But even a motorized wheelchair needs some kind of input from the user to control it, which still may pose a considerable challenge depending on the

AUTONOMOUS WHEELCHAIR LETS JETSON DO THE DRIVING Continue Reading

THAT’S NOT A JUNKER… THAT’S MY GENERATOR

Arduino News / By Ibrar Ayyub

If you live somewhere prone to power outages, you might have thought about buying a generator. The problem is that small generators are cheap but — well — small. Big generators are expensive. [Jake von Slatt] had an idea. He has a “yard car” which we thought might be a junk car but, instead, it

THAT’S NOT A JUNKER… THAT’S MY GENERATOR Continue Reading

KINETIC SCULPTURE INTERMITTENTLY LIGHTS UP THE NIGHT

Arduino News / By Ibrar Ayyub

We absolutely love the impetus of this project, as it definitely sounds like something a Hackaday reader would go through. After finally deciding between a CNC router and a laser cutter, [Eirik Brandal] was planning to “Hello, World” the CNC with something quick and simple, like maybe a few acrylic plates with curves and some

KINETIC SCULPTURE INTERMITTENTLY LIGHTS UP THE NIGHT Continue Reading