Our new part of the day is the ColorLight 5A-75B, a board that’s meant to drive eight of those ubiquitous high-density color LED panels over gigabit Ethernet. If you were building a commercial LED wall, you’d screw a bunch of the LED panels together, daisy-chain a bunch of these boards to drive them, supply power, […]
NEW PART DAY: LED DRIVER IS FPGA DEV BOARD IN DISGUISE Continue Reading
Let’s learn how to read a potentiometer, a type of rotating variable resistor, using Arduino’s analog input! We’ll connect up a simple circuit using a solderless breadboard and use some simple Arduino code to control a single LED. So far you’ve learned to control LEDs with Arduino’s output, and you learned to detect a pushbutton’s state (on
Read a Potentiometer With Arduino’s Analog Input Continue Reading
In this Instructable I will be teaching you how you can create your own (b)ambilight for under $40!Keep in mind that the Ambilight will only work on a PC running the Bambilight software. You will need the following components: Individually addressable RGB LED strip – Available on Aliexpress Arduino Nano Mini breadboard A few breadboard cables 12V DC
DIY | Ambilight Using Arduino Nano Continue Reading
This is my second project for LED Driver based on CAT4101 IC. The first project was for single White LED. This project has been designed to drive 3 channels of RGB LEDs with PWM signal which helps to create multicolor LED light. Arduino Nano is used to generate PWM signal for RGB LED and board
RGB Led Driver Shield for Arduino Nano Continue Reading
Off the shelf RGB colour pickers allowing you to extract and objects RGB values can range from a few hundred dollars to thousands depending on your needs. If you would prefer to build your very own portable RGB colour picker allowing you to extract colours in RGB valves from real like objects you may be
Arduino color picker reveals real world color RGB values Continue Reading
[Dirk] posted a video (you can see below) titled, “Mystery Retro Project Start.” That turned out to be the first of a multipart series on his Altair 8800 Again simulator. The front panel appears to be laser cut and in some future video episodes, we expect to see him simulate the CPU with a Teensy. There
ALTAIR 8800 AGAIN PROJECT Continue Reading
In this instructable you will learn how to communicate between Arduinos over a long distance up to 1.8km in open air. The HC-12 is a wireless serial port communication module that is very useful, extremely powerful and easy to use. First you will learn how to make a wireless instant messenger with the least effort
Long Range, 1.8km, Arduino to Arduino Wireless Communication With the HC-12. Continue Reading
This instructable is the written version of my “Arduino – Sound Sensor (with LED)” YouTube video that I’ve uploaded recently. I strongly recommend you to check it out. My YouTube Channel Step 1: Tutorial Sound sensors can be used for a variety of things, one of them could be turning lights off and on by
Arduino – Sound Sensor (with LED) Continue Reading
Donation boxes can be much more interesting and attractive when you combine them with electronics and a little bit of programming. This instructable will show you how to. As the name explains, making donation boxes interactive can help you gain much more attention and make people happy at the same time! Indeed, and awesome way
The Interactive Donation Box Continue Reading
Hello, everybody!!! It has been some time I had not updated my post here. Today I would like to share with you guys an experiment I made. I am going to control LEDs using MIT app inventor speech recognizer. Oh before I forget, I had also started a blog where I post some other Arduino
Voice to Arduino: Control LEDs Using MIT Speech Recognizer Continue Reading
