Set LED RGB light Scenes remotely Things used in this project Hardware components Arduino MKR1000 × 1 Breadboard (generic) × 1 RGB Diffused Common Cathode × 1 Story Using MKR1000 to control an RGB LED device. In our shortened example we will use a single RGB LED. In real world we would attach the RGB […]
Remote LED Mood Setter Read More »
This simple project shows how to make an app that controls an Arduino MKR1000 board with Evothings Studio by communicating over the TCP. Things used in this project Hardware components Arduino MKR1000 × 1 LED (generic) × 1 Resistor 100 ohm × 1 Jumper wires (generic) × 1 Breadboard (generic) × 1 Software apps and
Create Mobile Apps for Android and iOS Connecting to the MKR Read More »
Today we are building an Automatic Pet Feeder Using Arduino which can automatically serve food to your pet timely. It has a DS3231 RTC (Real Time Clock) Module, which used to set time and date on which your pet should be given food. So, by setting up the time according to your pet’s eating schedule,
Automatic Pet Feeder using Arduino Read More »
Using Arduino/ Genuino MKR1000 to connect ARTIK Cloud control I/O light LED. Things used in this project Hardware components Arduino MKR1000 × 1 Software apps and online services Samsung ARTIK Cloud for IoT Story https://www.arduino.cc/en/Main/ArduinoMKR1000 A simple project let mkr1000 connect to artik cloud, but it took me 2 weeks time. Since there are few
Start Connect ARTIK Cloud with Arduino/Genuino MKR1000 Read More »
Water quality data monitoring for swimming pools, fish aquarium and more! Things used in this project Hardware components Arduino MKR1000 × 1 Jumper wires (generic) × 1 DFRobot pH Meter × 1 Resistor 4.75k ohm × 1 Temperature probe × 1 Software apps and online services Samsung ARTIK Cloud for IoT Arduino IDE Story I.
Water Quality Monitoring Using MKR1000 and ARTIK Cloud Read More »
The Arduino Gatekeeper is an IoT-connected authenticator for outdoor gates and doors. No longer are keys required for secure backyards! Story Introduction The Arduino Gatekeeper is an IoT-connected authenticator for outdoor gates and doors (or anything else that can be monitored with reed switches). The first function of the device is to remotely monitor when
The Arduino Gatekeeper Read More »
In this project, we will use a 4Duino and several IR sensors to create a simple pet food dispenser. 4Duino checks whether a food tray contains enough food or not. It is programmed to read IR values from each sensor. These values change depending on the amount of food in the container. The feeding time can
Pet Food Dispenser featuring 4Duino-24 Read More »
In this project we will use an existing FM radio which went repair a long time ago, to convert it into a Smart Wireless FM Radio controlled using Phone, with the help of Arduino and Processing. We can convert any manually operated electronic device into a Smart Device using the same procedure. Every electronic device
Smart Phone Controlled FM Radio using Arduino and Processing Read More »
The provided software is based on USB Virtual Com Port (VCP) device. The setup is done with command line interface using terminal from any PC. The setup is stored in the internal flash and PC is not required for normal operation. The mini beacon keyer can be used when powered with 5V. For proper operation
Programmable CW Morse beacon Read More »
You just say what the thing does and then you add ‘-er’.” Replenisher keeps your fridge, office…stocked! Just scan! “I’m going on break! Story TL;DR; This project utilizes the AmazonDRS Arduino library to initiate frictionless purchases on Amazon by scanning NFC tags. Looking for some help getting started with AmazonDRS Dash Replenishment for Arduino and
AmazonDRS NFC Replenisher Read More »
