current

USB PD STAND ALONE ADAPTER BOARD FROM OXPLOT

USB-PD STAND-ALONE ADAPTER BOARD FROM OXPLOT

Electronics News Updates / By

Modern devices are quickly switching to USB-C power adapters, gradually fading out USB-A, and USB-B adapters. USB’s Power Delivery (USB-PD) protocol enables the supplies to be  flexible enough to handle charging (or powering) devices ranging from mobile phones to laptops. There are many high quality 90-100 Watt USB-C power adapters available. But unfortunately, there are many devices that […]

USB-PD STAND-ALONE ADAPTER BOARD FROM OXPLOT Continue Reading

TEMPERATURE SENSOR ACCURATE TO 0.25°C

TEMPERATURE SENSOR ACCURATE TO 0.25°C

Electronics News Updates / By

The STTS22H temperature sensor from STMicroelectronics offers high accuracy with low operating and standby current and flexible operating modes. By Gina Roos @ electronicproducts.com STMicroelectronics has launched its STTS22H temperature sensor with typical temperature-reading accuracy of 0.25°C and low operating and standby current. The device enhances temperature and heat-flow monitoring in asset trackers, shipping-container loggers, HVAC systems, air humidifiers,

TEMPERATURE SENSOR ACCURATE TO 0.25°C Continue Reading

NEW SURFACE MOUNT FULLY INTEGRATED CURRENT SENSORS

NEW SURFACE-MOUNT FULLY INTEGRATED CURRENT SENSORS

Electronics News Updates / By

The ACS772/3 family expands to include through-hole and surface-mount CB package options with enhanced working isolation voltage Allegro MicroSystems, a global leader in power and sensing solutions for motion control and energy efficient systems, today announced significant ease-of-use enhancements to its popular high current fully integrated ACS772/3 current sensor “CB” package family. These industry-leading, automotive grade high

NEW SURFACE-MOUNT FULLY INTEGRATED CURRENT SENSORS Continue Reading

20A 40V INTEGRATED POWER MODULE FOR DC BRUSHLESS MOTORS BLDC

20A/40V INTEGRATED POWER MODULE FOR DC BRUSHLESS MOTORS (BLDC)

Electronics News Updates / By

This project is based on STK984-090A which is a fully-integrated inverter with current rating 20A and supply voltage 40V DC. It has been designed to drive the Brushless DC Motors (BLDC) and permanent magnet synchronous motors (PMSM), the module works as output driver which include power stage and current sense circuitry, header connector provided to interface with

20A/40V INTEGRATED POWER MODULE FOR DC BRUSHLESS MOTORS (BLDC) Continue Reading

12V SLA LEAD ACID BATTERY CHARGER USING BQ24450

12V SLA LEAD ACID BATTERY CHARGER USING BQ24450

Electronics News Updates / By

This project has been developed to charge SLA (Lead Acid Batteries) . It helps to charge 12V Lead-acid battery up to 12Ah in capacity. Specific current output is possible by altering the current sense resistor.  The BQ24450 chip contains all the necessary circuitry to optimally control the charging of valve-regulated lead-acid batteries. The IC controls the charging

12V SLA LEAD ACID BATTERY CHARGER USING BQ24450 Continue Reading

TRINAMIC INTRODUCES THE TMCM 1617 SERVO CONTROLLER MODULE

TRINAMIC INTRODUCES THE TMCM-1617 SERVO CONTROLLER MODULE

Electronics News Updates / By

TRINAMIC Motion Control GmbH & Co. KG  announced the TMCM-1617 single-axis servo controller module designed for servo drives with 18A RMS and 8 to 28V DC supply voltage. Achieving high-current loop frequencies to minimize current ripple, the potted module enables smaller electric drives with high dynamics, according to the company. The TMCM-1617 also supports a range of encoders for

TRINAMIC INTRODUCES THE TMCM-1617 SERVO CONTROLLER MODULE Continue Reading

GWINSTEK GLC 9000 LEAKAGE CURRENT TESTER

GWINSTEK GLC-9000 LEAKAGE CURRENT TESTER

News & Updates / By

The GLC-9000 Leakage Current Tester provides comprehensive testing for general purpose electric equipment. Saelig Company, Inc. has introduced the GWInstek GLC-9000 Leakage Current Tester performs leakage current (also called touch current) tests on general purpose electric (IEC 60990) equipment. This tester uses nine measurement device networks to simulate the human body interacting with equipment under test.  Leakage current testing is needed to

GWINSTEK GLC-9000 LEAKAGE CURRENT TESTER Continue Reading

ANALOG DEVICES ANNOUNCES 42V 15A SYNCHRONOUS STEP DOWN REGULATOR SILENT SWITCHER 2

ANALOG DEVICES ANNOUNCES 42V, 15A SYNCHRONOUS STEP-DOWN REGULATOR SILENT SWITCHER 2

Electronics News Updates / By

Analog Devices announced the release of a new synchronous step-down regulator, LT8648S, that features second generation Silent Switcher architecture designed to minimize EMI emissions while delivering high efficiency at high switching frequencies. This includes the integration of input and boost capacitors to optimize all the fast current loops inside and make it easy to achieve advertised EMI performance

ANALOG DEVICES ANNOUNCES 42V, 15A SYNCHRONOUS STEP-DOWN REGULATOR SILENT SWITCHER 2 Continue Reading

WORLD’S FIRST MOS FET RELAY MODULE “G3VM 21MT” WITH SOLID STATE RELAY IN “T TYPE CIRCUIT STRUCTURE”

WORLD’S FIRST MOS FET RELAY MODULE “G3VM-21MT” WITH SOLID STATE RELAY IN “T-TYPE CIRCUIT STRUCTURE”

Electronics News Updates / By

OMRON Corporation of Kyoto, western Japan globally released its new MOS FET (*1) relay module “G3VM-21MT” on December 2, 2019. The product is the first electronic component in the world (2) to adopt a “T-type circuit structure” (3). With a T-type circuit structure consisting of compact-size and longer-lifecycle solid-state relays that output signals using no physical contact, the relay

WORLD’S FIRST MOS FET RELAY MODULE “G3VM-21MT” WITH SOLID STATE RELAY IN “T-TYPE CIRCUIT STRUCTURE” Continue Reading

Scroll to Top