Lumileds has added news LEDs to its Luxeon IR Domed Line with a significant increase in both DC and pulse drive current–up to 1.5A and 5.0A, respectively. The new emitters deliver radiant power of 1350mW at 850nm wavelength (slightly visible) or 1450mW at 940nm (invisible or covert IR). These new IR LEDs are engineered to […]
IR DOMED LEDS DELIVER UP TO 5.0A PULSED RADIANT POWER OVER 50° Continue Reading
ESP32-S2 WiFi SoC by Espressif Systems was first unveiled in May last year before its first internal development boards and datasheet were later showcased sometime in September but since the outbreak of the Coronavirus epidemic, progress on the board has really gone down the lane. However, the company recently announced its intentions towards starting mass production for the ESP32-S2, alongside other
MEET THE ESP32-S2 BASED SOC, WROOM AND WROVER MODULE Continue Reading
An affordable Arduino Turntable designed for Time lapse photography. Changing the gearing and code it can also be used for Photogrammetry/3D scanning or Video. The turntable operates on the move shoot move principle in the Timelapse and Photogrammetry modes where the camera is triggered via the sync cable. The electronics can be adjusted based on
3D Printed Timelapse/3D Scanning Turntable Continue Reading
The Fotric 226B’s AI algorithm automatically detects and assesses the temperatures of passing humans to provide instant fever alarms Saelig Company, Inc. has introduced the Fotric 226B Infrared Thermal Imager, a standalone infrared camera and PC software combination that provides safe, non-contact measurement of passing human traffic, without requiring person-to-person contact, ensuring the safety of the detection personnel
iWave Systems, a global leader in embedded system and cutting edge solutions, has partnered with Crank Software Inc., to support vibrant and rich graphics representation on the powerful i.MX 8 series System on Modules and SBC boards. Powered by the NXP i.MX8 application processors, the SOM and SBC are optimized for sophisticated real-time computing in embedded applications,
UNLEASH A WORLD OF SMART POSSIBILITIES WITH IWAVE AND CRANK Continue Reading
e-con Systems Inc., a leading embedded camera solutions company, today announced the launch of e-CAM50_CUCRL, a 5 MP camera board for Coral development kit from Google. e-CAM50_CUCRL houses e-con’s popular e-CAM55_CUMI0521_MOD camera module and can be directly plugged on to the Coral development kit using the supplied accessories. The camera software driver is V4L2 compliant and is available
E-CON SYSTEMS LAUNCHES CAMERA SUPPORT FOR GOOGLE CORAL DEVELOPMENT BOARD Continue Reading
MYIR introduces an Linux-ready industry-oriented MYC-C335X-GW CPU Module powered by TI’s AM335x ARM Cortex-A8 processor (800MHz AM3354 by default) which features PowerVR™ SGX530 for 2D and 3D graphics acceleration. Measuring only 50mm by 40mm, the MYC-C335X-GW is the fourth AM335x CPU Module designed by MYIR especially for gateway applications. It integrates a DDR3L RAM memory, a Nand Flash or an eMMC Flash, EEPROM and PMIC.
TI AM335X ARM SOM FOR GATEWAY APPLICATIONS Continue Reading
Based on Kendryte K210 RISC-V AI processor, Maixduiono AI development board comes with MI AI module and ESP32 module for WiFi and Bluetooth connectivity in Arduino UNO form factor. K210 comes with dual-core processor chip with independent FPU, 64 bits CPU bit width, 8 MB on-chip SRAM, 400 adjustable nominal frequency, and double-precision FPU supporting multiplication, division, and square
MAIXDUINO AI DEVELOPMENT BOARD K210 RISC-V AI+LOT ESP32 Continue Reading
Embedded Modules & Design-in Services Advantech, a global leader in the embedded computing market, is pleased to announce ROM-5720, a SMARC 2.0 module powered by the NXP ARM Cortex-A53 i.MX8M processor with excellent graphics performance and low power consumption. The ROM-5720 supports 4Kp60 resolution via HDMI 2.0 and 4Kp60 H.265 decoding with HDR. It features a
I knew there were devices that could trigger a camera to fire during a lightning strike, but their circuits were more complicated than I wanted to make. I’m a software guy not a hardware guy so I decided to use an Arduino and that allowed me to write a little code that made the circuit much simpler. Before I
Lightning Shutter Trigger for a Camera using Arduino Continue Reading
