battery

SINGLE BATTERY CHARGER AND FUEL GAUGE REFERENCE DESIGN FOR ARDUINO PLATFORMS

SINGLE-BATTERY CHARGER AND FUEL GAUGE REFERENCE DESIGN FOR ARDUINO PLATFORMS

The MAXREFDES96# from Maxim Integrated Products is an Arduino Uno R3-compatible board that provides battery charge, boost, and data-logging capabilities. The board can be operated tethered to a power supply or computer to charge a battery and operate untethered to use the battery to power the Arduino board. Typical applications are expected to include charger/fuel gauge evaluation and portable […]

SINGLE-BATTERY CHARGER AND FUEL GAUGE REFERENCE DESIGN FOR ARDUINO PLATFORMS Continue Reading

BATTERY FUEL GAUGE EVALUATION KIT FOR WEARABLES AND PORTABLE DEVICES

BATTERY FUEL GAUGE EVALUATION KIT FOR WEARABLES AND PORTABLE DEVICES

The MAX17262X evaluation kit (EV kit) from Maxim Integrated Products is a fully assembled and tested surface-mount PCB that evaluates the stand-alone ModelGauge™ m5 host-side fuel-gauge IC for lithium-ion (Li+) batteries in handheld and portable equipment. This EV kit supports a variety of applications such as: Bluetooth Headset Cases, Handheld Computers and Terminals, Health and Fitness Monitors,

BATTERY FUEL GAUGE EVALUATION KIT FOR WEARABLES AND PORTABLE DEVICES Continue Reading

SOLID STATE BATTERY IS SMALL ENOUGH FOR MEDICAL IMPLANTS

SOLID STATE BATTERY IS SMALL ENOUGH FOR MEDICAL IMPLANTS

UK battery maker Ilika has officially launched its millimetre scale solid state battery for medical implants, including smart contact lenses. Ilika a few days ago announced the launch of Stereax® M50 mm-scale solid-state batteries designed for medical implants. The Stereax M50 brings all the benefits of the Stereax products whilst taking solid-state batteries to a

SOLID STATE BATTERY IS SMALL ENOUGH FOR MEDICAL IMPLANTS Continue Reading

ON SEMICONDUCTOR CONTINUES TO MAKE BATTERY LESS IOT A REALITY WITH BLUETOOTH® LOW ENERGY

ON SEMICONDUCTOR CONTINUES TO MAKE BATTERY-LESS IOT A REALITY WITH BLUETOOTH® LOW ENERGY

ON Semiconductor, driving energy efficient innovations, continues to enable battery-less and maintenance-free IoT with the introduction of its RSL10 Multi-Sensor Platform powered solely with a solar cell. This complete solution supports the development of IoT sensors using continuous solar energy harvesting to gather and communicate data through Bluetooth® Low Energy, without the need for batteries or

ON SEMICONDUCTOR CONTINUES TO MAKE BATTERY-LESS IOT A REALITY WITH BLUETOOTH® LOW ENERGY Continue Reading

THE SEMI RUGGED RTC 1010M DO MORE WITH THE TABLET BUILT FOR WORK

THE SEMI-RUGGED RTC-1010M: DO MORE WITH THE TABLET BUILT FOR WORK

10.1″ Semi-rugged Tablet Features With Intel® N3350 / N4200 Processor With Windows® / Android AAEON, a major developer in Industrial Rugged Tablet Solutions, announces the RTC-1010M Semi-Rugged Tablet. The RTC-1010M builds on AAEON’s experience in rugged tablet design. Featuring a 10.1” sunlight readable screen, IP54 certification and a wide range of options and features, the RTC-1010M

THE SEMI-RUGGED RTC-1010M: DO MORE WITH THE TABLET BUILT FOR WORK Continue Reading

TOHOKU UNIVERSITY REVEALS SWALLOWABLE THERMOMETER AT SEMICON JAPAN

TOHOKU UNIVERSITY REVEALS SWALLOWABLE THERMOMETER AT SEMICON JAPAN

A lot of people know that temperature is the degree of heat present in a substance. The common way of measuring body temperature is the armpit method where temperature is measured by putting the thermometer under the armpit. However, there are better ways of measuring this temperature. Right now, the most accurate temperature measure is

TOHOKU UNIVERSITY REVEALS SWALLOWABLE THERMOMETER AT SEMICON JAPAN Continue Reading

Joulescope Precision DC Energy Analyzer

Joulescope: Precision DC Energy Analyzer

Joulescope™ enables designers, engineers, and makers to quickly and easily optimize the energy consumption and battery life of a target device. Joulescope is designed to automatically handle wide current ranges and rapid changes in energy consumption, while allowing the target device to run normally. Jetperch LLC writes: Measuring energy consumption during product development is crucial,

Joulescope: Precision DC Energy Analyzer Continue Reading

Catena 4710 – LoRaWAN based Feather compatible FPGA board with RISC V Core

Catena 4710 – LoRaWAN based Feather-compatible FPGA board with RISC-V Core

With the increase of high integration programmable chips, FPGAs are getting more and more popular. FPGAs has been traditionally known to be generally complex, but a new line of FPGAs have been showing some promise and that is believed that will help increase their popularity. Tiny FPGAs are the next promising thing, they are low-cost

Catena 4710 – LoRaWAN based Feather-compatible FPGA board with RISC-V Core Continue Reading

FDK introduces high voltage ultra small size 3V all solid state SMD battery 1

FDK introduces high voltage/ultra small size 3V all-solid-state SMD battery

FDK CORPORATION will begin sample shipment of oxide based all-solid-state battery using high electrochemical potential cathode material “lithium cobalt pyrophosphate (Li2CoP2O7)” which was jointly developed with Fujitsu Laboratories Ltd. February 2017. While applications using various batteries such as IoT devices and wearable devices expand and progress, the specifications required for batteries are becoming increasingly diverse,

FDK introduces high voltage/ultra small size 3V all-solid-state SMD battery Continue Reading

Cosmo Communicator Smartphone Runs Android 9 or Linux

Cosmo Communicator Smartphone Runs Android 9 or Linux

Planet Computers has launched Cosmo Communicator, a dual-screen clamshell-based mobile communicator. It is built to serve as a pocket computer, a mobile phone, and a high-resolution camera. The Cosmo has dual color displays. One 2″ display serves as an external color touchscreen for easy phone call control and notifications, while the other is inside. The

Cosmo Communicator Smartphone Runs Android 9 or Linux Continue Reading

Scroll to Top