A friend of mine wanted to control Cubase, his audio recording software, with a push button so that he could stop and start recordings remotely without having to go over to the computer and type on the keyboard. You may be able to do this in other recording software, we just happen to use Cubase.
Controlling Cubase with Arduino based MIDI Continue Reading
Project-specific parts You’ll need the standard parts (Arduino board breadboard wires pliers and so on) along with these extras: DHT11 temperature/humidity sensor 7 x 330-ohm/0.5W metal film resistors 3 x 4.7k-ohm/0.5W metal film resistors 2 x BC337 NPN transistors 2 x LTS543R or FND500 common cathode seven-segment displays They shouldn’t cost you more than $15
Arduino Masterclass Part 2: Build an LED weather station using arduino Continue Reading
Origami is the traditional Japanese art of paper folding. In this project, with a little help from an Arduino, you can bring your origami into the 21st century and make it an interactive art! The result shown here uses Bare Conductive paint to give an origami flower proximity sensing powers. When you put your hand
Proximity Sensing Origami Flower using Arduino Continue Reading
In this article, we will go over how to connect an HD44780 LCD to an arduino in order to display any text that we want to show on the LCD. To do this, first, we must make the appropriate physical connections from the arduino board to the LCD. Then after, we must write the code
How to Display Text on an HD44780 LCD with an Arduino Continue Reading
Hey guys, I’m back with another instructable. This is about RC speed controllers. What this will do is allow you to test out your speed controller in the Arduino world using Serial, then you write the values down and can use them for your projects. Submitted by Newton Labs for the Instructables Sponsorship Program Step
Controlling speed controllers with Arduino Continue Reading
What I’m going to show you is how to make an iTunes control device using an Arduino and a touch screen. The iTunes Control works by reading area’s of the touch screen and send a letter to the computer via the serial port, which is monitored by an apple script which run a command based
Arduino Touch Screen iTunes control (ATSIC) using arduino Continue Reading
In this quick Arduino tutorial I will explain how you can control a relay using the Arduino Board, one 1K and one 10K resistors, 1 BC547 transistor, one 6V or 12V relay, one 1N4007 diode and a 12V fan. When the button is pressed the fan will turn ON and will remain in this state
Control a Relay with Arduino Continue Reading
Easily control your iPod with Arduino using serial commands. This instructable includes the schematic, the code and some extra info; everything you need to make this work. USB,battery or wall power supply powered. Step 1: What you need Parts: 5x 1K ohm resistors 2x 1M ohm resistors 1x 12K ohm resistors 1x 1.5K ohm resistors
Easily control your iPod using Arduino Continue Reading
Hi, so me and my pal are setting up so we can make PCB´s. We are currently making a UV exposure box (possibly another instructable) and for this box, we needed a timer, so this is what we have done so far, and what we are going to do. This project is based on the
Make an Arduino Timer Continue Reading
Converting an RC car into a robot is a quick and easy way to get started with robotics. At the very least, when you get bored of playing with your remote control car after three days, you can turn it into a robot that will do all of your evil bidding. Well, maybe not all
RC Car to Robot using arduino Continue Reading
