I am very excited to share this project with you because it looks absolutely beautiful and is super easy to make! It’s a NanoLeaf inspired wireless Arduino RGB LED lights project that not only allows you to create any custom NanoLeaf shape you want but also use the same identical segments to create a 4-digit […]
Custom NanoLeaf Lights! DIY, Wireless, Modular, Arduino, 3D Printed! Continue Reading
“Marblevator, Pertual?, Cradle” like “Marblevator, Perpetual?, Version 2” and “Marblevator, Perpetual?” is not perpetual at all as it is simply another illusion. And like its predecessors it is a very quiet illusion with the only noise being that of the marble as it rolls back and forth in the cradle. I’ve incorporated an Arduino Nano
Marblevator, Perpetual?, Cradle. Continue Reading
Hi guys, I made an automatic 3D Printed Pet Feeder (or just dispenser, but I use it to feed my dog). I 3D modelled all that project. U can print it by yourself. All parts are down there. Basically how it works, is u type in two Feeding Times, for example 8:30 and 17:30, then
Automatic Arduino Pet Feeder – 3D Printed (With Stepper Motor) Continue Reading
Despite great progress over the past century, more than a billion people still don’t have access to clean drinking water today. Much of the water on Earth’s surface is polluted, but it’s not always easy to tell a dirty stream from a clean one. Professional kit for water analysis can be expensive, which is why
MONITORING WATER QUALITY USING LOTS OF SENSORS AND MACHINE LEARNING Continue Reading
3D-Printed Prank Vibrating Cup Picture the following: you have an nice white cup in front of you. It’s filled to the brim with sparkling, cool, and refreshing H20. Your fingers curl around the nicely curved handle, and you bring the cup to your lips. Suddenly, a strong vibration assaults the nerves in your hand, causing
3D-Printed Prank Vibrating Cup Continue Reading
First off this project was a combination of of two great online resources. I had been looking into building an eggbot for a while and since I had a lot of ping pong balls on hand after one of my other videos the time was right for making my SphereBot that could write on ping pong balls.
3D Printed Arduino Controlled Eggbot/Spherepot Continue Reading
What is it about solenoids that makes people want to make music with them? Whatever it is, we hope that solenoids never stop inspiring people to make instruments like [CamsLab]’s copper pipe auto-glockenspiel. At first, [CamsLab] thought of striking glasses of water, but didn’t like the temporary vibe of a setup like that. They also considered
ARDUINO AUTO-GLOCKENSPIEL LOOKS PROPER IN COPPER Continue Reading
It started with someone asking [James Bruton] about using a Möbius strip as a tank tread. He wasn’t sure what the point would be, but he was willing to make one and see what happened. Turns out it works reasonably well! The main design challenge was creating a tread system that would allow for the required
BEHOLD THE TRACK-TWISTING MÖBIUS TANK Continue Reading
A while back, we constructed a pair of LED skateboard truck-risers. That project was intentionally created without the aid of advanced tools and techniques. We decided to try the concept again but without limiting ourselves. This time around we used custom designed PCBs and 3D printed parts. There was no limiting ourselves to hand tools and
PCB – Skateboard Floodlight V2 Continue Reading
The MMORPG RuneScape holds a special place in the hearts of those who played it in the early 2000s. Sure it might seem exceptionally quaint by modern standards, but at the time it was groundbreaking stuff. Plus you could play it for free, which certainly helped get people onboard. While there’s a more modern build available, many
LED HEART KEEPS TABS ON YOUR RUNESCAPE CHARACTER Continue Reading
