When I was working on the Toy Magnetic Levitation project with a solenoid coil, I thought to myself, why didn’t I make a coil winder. So I took my times to build a simple coil winder based on GRBL firmware and it was made from PVC pipes. I’m willing to share how I made it, please check
GRBL Based Coil Winder From Water Pipe Continue Reading
You could always see 7-segment displays around you used to display digits, like in timer, clock, etc. In this mission, you are going to learn how it works and display numbers on it. Let’s start. Step 1: What You Will Need The parts you will need are all included in this Maker kit. SwiftIO board Shield
7-segment Display Using Swift Language Continue Reading
A great introductory project for those diving into the IoT and Arduino platform. Working with motors and an IR sensor helps newbies understand various components and sensors compatible with the Arduino. Using the remote control, you will be able to control the robot’s movement allowing the robot to move in straight lines or turn based
Remote Control Arduino Car Continue Reading
The Picture Exchange Communication System, or PECS, allows people with little or no communication abilities to communicate using pictures. People using PECS are taught to approach another person and give them a picture of a desired item in exchange for that item. By doing so, the person is able to initiate communication. A child or
PECS Communication Board Continue Reading
Hello everybody hope you’re doing well, in this instructable I’m going to show you how to make a wireless motion alarm system, this device consists of a transmitter and a receiver. So essentially it is a pretty simple and basic wireless motion alarm system with light indication. Besides being fairly useful it is also a
DIY Arduino Wireless Motion Alarm System Continue Reading
In this IoT project, I have shown how to make an IoT-based Home Automation with Arduino IoT Cloud & Alexa using ESP32 to control 4 home appliances with voice commands. If the internet is not available, then you can control the home appliances manually with switches and IR remote. During the article, I have shown
Arduino IoT Cloud ESP32 Alexa Voice Control Smart Home | IoT 2021 Continue Reading
In this Instructable, I’ll show you how I managed to create my own I2C controlled device that I can then connect to any microcontroller and interact with it over I2C. In my case, I’m using it to control an AC dimmer module from a separate Arduino Nano and I then interact with it from another
Custom I2C Slave Sensor/device With Arduino Continue Reading
There are some great hackable devices in the SONOFF range such as the original SONOFF switches, the Slampher and the SONOFF Luxury wall plate which is the subject of this instructable. These devices are based around the ESP8266 or ESP8285 WifFi modules and are easily hackable. I’ll only cover here how to convert a wall
Hacking a Sonoff Touch Panel to Work With MQTT and Homeassistant Continue Reading
We created a LED matrix that shows a Pacman and a Ghost. The figure changes by pressing a button. Also, the ghost takes the color according to the external temperature. It means, if it is cold, the figure turn blue, but if it is warm outside it will change to red. Supplies 71 leds (led
Pacman/Ghost LED Matrix Continue Reading
A disclaimer right up front, I didn’t shrink the remotes and that’s not a photo of my remotes through a microscope. But what I did do was shrink them down to the buttons I use the most. Not even sure what most of the others do! However, most of you will know what this image
Honey I Shrunk the Remotes! Continue Reading
