We enjoy having an ordered, methodical and efficient lifestyle, however, more recently we have acquired a taste for the disorganized, topsy-turvy, chaotic lifestyle. Which is why, in this Instructable we attempt to address our new found love for chaos by building a simple machine to visualize the effects of chaos. We used the power of
Visualizing Chaos With the Double Pendulum Continue Reading
Introduction ESP-MESH is a networking protocol built on the top of the Wi-Fi protocol. ESP-MESH allows numerous devices (generally referred as nodes) spread over a large physical area to be interconnected under a single WLAN. ESP-MESH allows multiple nodes to communicate with each other under a single wireless local area network. It is supported on
Getting Started With ESP-MESH and 8266 -8266 Continue Reading
This instructable is part of the course Physical Interaction and Realization at KTH, Royal Institute of Technology. We are going to teach you how to build two, quite organic and interactive plant-lamps, Thorulf and Svamp. Thorulf is a plant with flex sensors and LEDs while Svamp is a collection of mushrooms with circular force sensors. They are connected via Bluetooth and
Alone Together – Plant Lamps Continue Reading
The design was inspired by a product that is also presented on Instructable called “Arduino Basics with Night Light” (https://www.instructables.com/Arduino-Basics-With-…). Originally, the device is only allowed to change the LED lights by pushing down a button; after adding the codes and circuits (added: a speaker to notify the user for using recommended relatively peaceful color-blue/a
Arduino LED Night Lights With Switch to Turn on and Off Continue Reading
Hi every one, here Chris, and I want to show you how I made my own Arduino AC dimmer that can control AC loads such as motors and lights easily. It has the power to handle 1200+ Watts and It’s a very nice project for domotics and home automation because the microcontroller I used is
Make Your Own Arduino AC Dimmer | Drive Motors & Lights Continue Reading
Who hasn’t ever left his phone on a spot and realised they had lost it too late? Anonimoconhache present you the solution: Don’t Lose Me. With this amazing gadget you will never lose your phone again. Whenever you are too far away from your phone Don’t Lose Me will start to blink and whistle, as
Never Lose Your Phone Again Continue Reading
{This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com).} Inspired by the Wind powered machines built by “Theo Janse” I’ve come up with a design of my own, but with a twist. This design houses two 12volt motors to provide the power, an Arduino,
RC Strandbeest Continue Reading
Exactly a year ago (February 2020), James’ wife wanted to expand her plant growing setup in the house. This included a bigger, larger, taller plant growing area AND the need for more lighting. BINGO! The seed for the Idea was planted. After an exhaustive market research, not able to find the product that we had
Open Grow Light Continue Reading
This is a count down timer with some flair! This project was made as part of an assignment for an online engineering course. The purpose was to have a timer with a set time which would then prompt the user to some action. The timer is activated when the button is pressed, and the LCD
Predator Count Down Box Continue Reading
Welcome to an Arduino beginner project. It’s a simplification of my previous instructable; it’s designed to be easier to reproduce. This is a timing minigame where the active light moves back and forth across a row of lights in order. When the button is pressed the light stops. If the light stops on the center light
Carnival Lights Game Continue Reading
