This a Knight Rider Style LED Chaser Done with a Arduino Duemilanove with an ATmega328 chip. Step 1: Things you’l need: 6 LEDs (any color) 1 Breadboard 1 100 Ohm Resistor 12 Breadboard Jumpers 1 Arduino Duemilanove “or” Decimila 1 USB cable with A-type connector on one end, and B-type on the other. (See photos)
Knight Rider Rides Again using an Arduino Continue Reading
This project is a part of experiments done while doing an artist in residence at Instructables. You can see the other projects here. Making a plant sing has been a trick since the Theremin was invented. Here I am going to teach you how to do this with and arduino board, a gameduino shield and a the touch shield
Singing plant. Make your plant sing with Arduino, touche and a gameduino Continue Reading
Almost all electronics have some sort of human interface, from blinking lights and beeping speakers to seven segment alphanumeric and Liquid Crystal Displays. This Instructable is about salvaging and testing Liquid Crystal Displays, and a couple tricks I know to make salvaging them more successful. I salvage; components can get expensive, LCDs can run $10.00
Salvaging Liquid Crystal Displays (LCDs) Continue Reading
Today I’m going to show you how I made my “light painters palette” aka light box. If your into electronics and photography than this is probably something you are going to like. Supplies: -Arduino (I’m using a arduino pro mini which requires a ftdi basic to program, But an uno or leaonardo… would work just fine) –Tri
Light Painters Palette aka Light Box Continue Reading
Activities of daily living (ADL) are self-care activities that are usually taken for granted, since as the name implies they are performed on a daily basis. If you have ever ended up in a cast, or on crutches you can empathize how menial daily activities can suddenly be very difficult to perform. Waking up in the morning and maintaining a schedule
Open Source Hearing Impaired Alarm Clock using Arduino Continue Reading
This project used the Si470x FM radio receiver and an ardurino to make an over the counter kitchen radio. These parts had been purchased for a different build that unfortunately met a premature end. The concept for this project is simple. Play my favorite news and music radio stations while having a form factor that
Over the Counter Kitchen Radio using Arduino Continue Reading
Update: The Arduino system is fine; the only thing you have to take into consideration is the 9.54 hour rollover event, which Rob Faludi has provided an excellent solution for here. I made up a nice little over-analysis of the issue, available here. For a while, I’ve wanted to make a clock that can change
Controlling a clock with an Arduino Continue Reading
So far my Arduino projects have all needed only a small number of output pins. In a previous post I talked about moving some of the logic off the Arduino and into other integrated circuits in order to free up pins on the Arduino. While this can help, I’m sure there will come a time
An 8-Bit Waterfall using Arduino Continue Reading
This instructable will show you how to create a simple servo leg that can be controlled by buttons on an arduino or via serial. Here is a video of the leg in action http://www.youtube.com/watch?v=Q8i1nrPIJvo Leg Materials: Popsicle sticks-make sure that all of them are flat and not curved, like in the picture Paper clip 4
How to make a servo leg using Arduino Continue Reading
If you haven’t noticed, as soon as you clicked into this instructable, you are now following me if you weren’t already, you Favorited the instructable, and you voted for this instructable in all contests it is entered in. Then the buttons all dissappeared. It’s okay though. If you really want to, you can still go
DIY Driving Simulator using an Arduino Continue Reading
