Hi all, For a project, I was looking for a cheap solution to send data from an Arduino to an other one. The serial port was already taken, and my transmission (unidirectional) needed to be wireless. My researches has brought me to discover these kinds of radio modules (433MHz). They were available on the net,
Cheap wireless transmission between two Arduinos with Infrared Continue Reading
[ This Instructable was made at the Taipei Hackerspace littleBits Instructables Build Night. ] Can’t watch the World Cup football games, but want to know when important game events (ie. goals) happen? Then littleGoal is for you! The littleGoal setup will monitor the game’s progress, and alert you via vigorous flag-waving and a photogenic Goal!
LittleGoal: World Cup Match Notifier using Arduino Continue Reading
Overview: I’ve often thought that a lighthouse would make a great project for an Arduino, and so I decided to give it a try using one of the local lighthouses here in Erie, Pennsylvania as inspiration. I chose the North Pierhead Lighthouse that guards the entrance to Presque Isle Bay. The model features a white
Arduino Controlled Lighthouse Continue Reading
The aim of this project is to create a setup to capture the image of a falling object or any object in motion at a precise time using a DSLR and Arduino microcontroller. It can be done in many different ways, but the method I tried is illustrated below. Figure 1: Schematic of the setup
Capture the image of a falling object using Arduino Continue Reading
4./ Interactivity & electronics 4.1/ Switches / characters 4.2/ Screen / interface 4.3/ Motor controller 4.4/ I/O controller & interface [4./ electronics] [4.1/ switches / characters] The characters on top of the moving platform function, as interfaces, actually as on-off switches. While standing in its position on the platform that keep a switch on. Once
Retablillo de las Maravillas v1.0 Continue Reading
Overview ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP8266 has powerful on-board processing and storage capabilities that allow it
Arduino Basic Wifi Project using ESP8266 wifi module Continue Reading
Sweeps the shaft of a RC servo motor back and forth across 180 degrees. This example makes use of the Arduino servo library. Hardware Required Arduino Board (1) Servo Motor hook-up wire Circuit Servo motors have three wires: power, ground, and signal. The power wire is typically red, and should be connected to the 5V
Stepper motors are not smooth – they move in “steps”. Different motors have a different number of steps to make one complete rotation. You use software to step the motor forward or backward at different speeds. There are two kinds of stepper motor bipolar and unipolar – Unipolar will have five or six cables coming
Stepper Motors Continue Reading
Here is how to connect a motor, a switch and an LED to your Arduino and how to do some checking to make sure that everything works. The strategy is to get the circuit going in stages, testing each part as you go. Once everything is wired correctly and can be either controlled or read
MOTOR SWITCH LED Using Arduino Continue Reading
This shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. Its dual MC33926 motor drivers operate from 5 to 28 V and can deliver a continuous 3 A per motor. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can
Pololu Dual MC33926 Motor Driver Shield for Arduino Continue Reading
