Projects Archives - Page 23 of 410 - Use Arduino for Projects

DIY Cheapest Bluetooth Controlled Home Automation

Step 1: COMPONENTS REQUIRED Bluetooth module (HC-05) AT89S52/C51/S51/C52 microcontroller Relay Driver ULN2003A Relay Resistances and capacitors as circuit diagram depicts(below) power module(if the input is more than 5V or else not necessary) IC 7805(5V voltage regulator) 1000uF capacitor 10uF capacitor led and resistance(as per convenience so that led doesn’t get damaged) IMPORTANT NOTE: USE 11.0592MHz

DIY Cheapest Bluetooth Controlled Home Automation Continue Reading

Barcode Based Complete Security and Enrollment System Using Tiva

Security – Safety Projects / By Ibrar Ayyub

This is Tahir Ul Haq, bringing you another exciting and innovative Tiva Micro-controller based project. This is the third instructables in the Series. Hope you will like it. This time it is Bar-code Based Complete Security and Enrollment System. The project focuses on a bar-code based security and enrollment system. In this project, a Bluetooth

Barcode Based Complete Security and Enrollment System Using Tiva Continue Reading

Crius ROT8 MIDI Controller [ABLETON READY – Auto Mapping] Rev1.1

LCD Projects / By Ibrar Ayyub

The last couple of years I started learning about electronics from nothing to be able to build my own MIDI controllers that would serve my needs , taste and be cheaper overall in comparison with the branded products.This is CRIUS ROT8 MIDI CONTROLLER that consists of 8 potentiometers and 3 buttons with which we can

Crius ROT8 MIDI Controller [ABLETON READY – Auto Mapping] Rev1.1 Continue Reading

Apollo 11 Arduino Clock

Clock – Timer Projects / By Ibrar Ayyub

Project and Instructable write-up done by Ian Lacy on behalf of the MIT Edgerton Center. In this project, I’ll show you how to build an Apollo 11 clock. The clock has each hour associated with a leg of the mission, and plays an associated audio clip at each hour. Every third hour, it also has a

Apollo 11 Arduino Clock Continue Reading

Super Long (7′) Lightsaber

LED Projects / By Ibrar Ayyub

There are so many authentic looking lightsaber build guides but not many on building a super long lightsaber. Regarding Star Wars, I’m not sure why lightsabers are normal sword size anyway. Its not like the longer the lightsaber, the harder it would be to swing. I assume they are essentially weightless. Just make it 10′

Super Long (7′) Lightsaber Continue Reading

HydroBuddy

Other Projects / By Ibrar Ayyub

HydroBuddy is a hydration-promoting device, designed for people who spend most of their day in one place (such as behind a desktop) and tend to forget about hydrating themselves. Once set up, it passively tracks how much water you drink, gently reminding you to drink up when it notices you’re hydrating yourself too little for the

HydroBuddy Continue Reading

Wireless Communication of Multiple Variables Between 2 Arduinos Using HC-12

Wireless Projects / By Ibrar Ayyub

In this tutorial, I will show you how to achieve wireless communication of variables between 2 Arduinos using the HC-12 module, that operates from 433,4-473 Mhz. HC-12s are wireless modules for arduino to arduino communication, because they can send multiple variables over long distances-ones up to 1km-using only 2 digital pins, not even PWM pins,

Wireless Communication of Multiple Variables Between 2 Arduinos Using HC-12 Continue Reading

ITTT || ARDUINO-UNO || ANTIPONG CONSOLE

Game – Entertainment Projects / By Ibrar Ayyub

This project and instructable were made as part of an assignment at HKU ( University of the Arts Utrecht ), during the module: If This Then That. In this instructable we’ll be making a small game console that plays an inverted version of pong. In this version of pong you’ll be dodging the balls instead

ITTT || ARDUINO-UNO || ANTIPONG CONSOLE Continue Reading

Pseudo Perpetual Spinning Top

Other Projects / By Ibrar Ayyub

You must have seen many magic tricks and wondered how it works so, here’s another one but you don’t have to figure out how it works. I will show how it works (Spoiler – It uses magnets and some electronics) and how you can make one yourself. This magic Spinning Top rotates forever and you

Pseudo Perpetual Spinning Top Continue Reading

Make A G Meter using Arduino

Metering – Instrument Projects / By Ibrar Ayyub

I have a late 80’s VW and the gauge cluster has 5 dummy LED locations underneath the other warning lights. Well I was tired of the m not doing anything, so I decided to do something about it. I came up with the idea to put a lateral gravitational force mater (G Meter) in there

Make A G Meter using Arduino Continue Reading