In this Instructable I’m going to show you how I went about building my very own life size talking Portal Turret from start to finish. This is a fairly in depth project that will cover every stage of construction and all the techniques I used along the way. Hopefully there will be a lot of […]
Building a Portal Turret with motion controlled audio and lighting Continue Reading
Pan/Tilt Motion System for Control Education Ricardo G. Sanfelice, University of Arizona Project supported by Mathworks Website developed by Colin Lasharr, University of Arizona Contents Introduction Instructions for Building the System Installation Instructions The Arduino Board Simulink Initial Parameter Identification System Identification for Zenith Component System Identification for Azimuth Component Running An Experiment Tracking
Pan/Tilt Motion System for Control Education Continue Reading
This is a Nabaztag – Armenian, apparently, for “hare”. It’s an adorable bunny rabbit packed with sensors and communication devices…. and it’s completely unusable. There’s people who wrote some interesting software to hack it, and I applaud them: however, I could never actually get my Karotz (Nabaztag’s third incarnation) through the arduous initialization. So, to
Hack the Nabaztag using Arduino Continue Reading
The last time I was home visiting my parents I noticed bumper imprints caused by my mother suburban on the stairs leading up from the garage. Their garage it turns out is just barely long enough to fit their gigantic vehicles. So I decided it would be nice to have some visual cue for parking.
DIY Parking Sonsor using Arduino Continue Reading
Getting Started The goal of this project was to create filters and controls to that can manipulate sound that is being generated through an Arduino. Normally Arduino can only generate simple tones that are not useful if you are trying to achieve complex sounds and do sound manipulation. In order to do this project Mozzi
Using Mozzi Library with 5 potentiometers using arduino Continue Reading
The Arduino Quilting Machine combines the mechanics of a sewing machine, CNC technology and Arduino as an operating system. The project is designed to translate a vector file from a computer into G-code and subsequently into Arduino language which then moves the machine. The project uses four stepper motors to control the x-axis, y-axis, the
Arduino Quilting Machine Continue Reading
This instructable will go over the steps to connect a RF module from an RROD xbox to your computer so you can use a wireless controller with your computer. ******DISCLAIMER******* DONT TRY THIS IF YOU DONT HAVE ANY EXPERIENCE WITH ELECTRONICS/SOLDERING OR COMPUTERS IM NOT RESPONSIBLE IF YOU SCREW UP…. now that we’ve gotten that
Diy Xbox wireless controller adapter for Pc Continue Reading
Is your analog clock just not doing enough stuff? Want to do digital things with an analog clock? This tutorial will show you how to make a Kit Cat Clock play a “meow” sound clip, at precise time intervals, using the Atmega 328P-PU via the Arduino Uno development board. In my example, the meow will
Make a digital “meow” from analog clock using arduino Continue Reading
This is the documentation page for the Spring 2012 DIY Telepresence project. Here you will find schematics, software, and guides for the robot. The goal of the project was to design a low-cost, easy to build telepresence robot. Some of the features include: Segway based mobility plane Robot arm Aluminum frame Two way-video conferencing using
DIY Telepresence Documentation Continue Reading
Total Recall is a Simon based game for the Arduino. Your basic Arduino Simon Game consists of 4 buttons, 4 LEDs, an Arduino, some code and maybe a speaker and sound effects. Total Recall takes things a step further by adding an LCD display and offering 1 and 2 player game modes. The 1 Player
Total Recall- Arduino Simon Says on steroids Continue Reading
