I’ve always wanted to do an Arduino project, but never had any great ideas for one until my family was invited to a fancy hat party. With two weeks lead time, I was curious if I could both plan and execute a motion sensitive LED animation hat. Turns out I could! I probably went a […]
In this project, we will learn about LED Matrix Displays and two different projects on Arduino 8×8 LED Matrix Interface. The first project will be a simple interface between Arduino and 8X8 LED Matrix to display information (even scrolling information and images can be displayed) and the second project will be an advanced project where
Arduino 8×8 LED Matrix Read More »
Hello Everyone, I like this site too much, the site really played very important role in awakening my enthusiasm and creativity. This is my first project and its really for the first timers project. I got this project from Instructible site , modified to access from web and mobile. My aim was to control some
To blink LED from mobile phone or iPod or another computer via WiFi Read More »
This Instructable covers the assembly of a circuit capable of PWM-ing (pulse width modulating) a high-power RGB LED strip and programming an Arduino to cycle through a range of colors. In this context, “high power” is 9-12 volts. I will discuss how to mount a transistor to a heatsink and assemble the circuit. I will
RGB LED Strip Circuit with Arduino Read More »
Step 1: IR library First you need to go to this page and download the IR library. You just need to follow the read me file to install. I think that any IR remote control can do this, I’ll be using a Philips Universal one. Step 2: Parts required Parts list: 1x Arduino 1x Breadboard
Arduino – Control LEDs with a Remote Control Read More »
These are step by step instructions for assembling the 8×8 LED Board kit from moderndevice.com. I had never played with LED displays before using this kit. I suggest reading through all the assembly steps BEFORE starting to solder because assembly order DOES matter with this kit. Overall, this is a very simple assembly. It does
Assembling the 8×8 LED Board Kit Read More »
Ever feel like there aren’t enough toys at the intersection of cuddly and terrifying? Wish your stuffed animals could double as weapons? Then I’ve got the toy for you. These Laser Tag Stuffed Animals easily transform from being a cuddly night light to the world’s softest laser tag weapon. Check out my laser tag plushie
Laser Tag Stuffed Animals Read More »
Good day fellow enthusiast! Here is one of my latest and simplest shield designs for an arduino board. The thing here is, sometimes we have a hard time checking out which I/O pins are LOW or HIGH, especially when we are dealing with LED, motors, etc. Now, here is one of the solutions that you
D-Led Shield v1.0 (for monitoring) Read More »
The Siemens DLO7135 Dot matrix LED is one amazing piece of optoelectronics. It’s billed as a 5×7 Dot Matrix Intelligent Display (r) with Memory/Decoder/Driver. Along with that memory, it’s got a 96-character ASCII display set with upper and lower case characters, a built-in character generator and multiplexer, four levels of light intensity, and it all
Using a Dot Matrix LED with an Arduino and Shift Register Read More »
This instructable was designed for beginners in mind, but advanced users can easily adapt it to fit their needs and wants. It only uses a few common components, so you shouldn’t have much trouble putting this together. It’s a good waste of 5 minutes with a satisfying result (at least in my experience), and everything
Dirt cheap Arduino LED light bar Read More »
