LTC2966 – 100V Micropower Dual Voltage Monitor


  • Wide Operating Range: 3.5V to 100V
  • Wide Monitoring Range: 1.75V to 98V
  • Quiescent Current: 7μA
  • Adjustable Threshold Range
  • Internal High Value Resistive Dividers
  • ±1.4% (Max) Threshold Accuracy Over Temperature
  • Polarity Selection
  • 100V Rated Outputs
  • Selectable Built-In Hysteresis
  • 20-Lead SW and 16-Lead 3mm × 3mm QFN Packages

LTC2966 - 100V Micropower Dual Voltage Monitor


The LTC®2966 is a low current, high voltage dual channel voltage monitor. Internal high value resistors sense the input monitor pins providing a compact and low power solution for voltage monitoring. Each channel includes two comparator reference inputs (INH/INL) to allow configuration of a high and low threshold using an external resistive divider biased from the on-chip reference. Range selection pins are provided for each channel to set the internal resistive dividers for 5x, 10x, 20x and 40x scaling. The thresholds are scaled according to the range selection settings. Additionally, either INH or INL can be grounded to enable built-in hysteresis. Polarity selection pins allow each output to be inverted. The outputs are 100V capable and include a 500k pull-up resistor to an internal supply.


  • Portable Equipment
  • Battery-Powered Equipment
  • Telecom Systems
  • Automotive/Industrial Electronics

For More Details: LTC2966 – 100V Micropower Dual Voltage Monitor

About The Author

Scroll to Top
Read previous post:
ams develops MEMS VOC gas sensor
ams develops MEMS VOC gas sensor

Gas sensing techniques are continually being investigated to improve selectivity and sensitivity of identifying different types of gases. There are...