LORA TUTORIALS FOR THE DIY MASSES




LoRa is the go-to tech for low power, long range wireless sensor networks. Designing with off-the-shelf modules can be a boon or a bane depending on the documentation and support. Luckily, [Renzo] has prepared a set of tutorials

 to get you started.In his seven part series of write-ups, [Renzo] starts by connecting the E32 module from AliExpress to an Arduino as well as an ESP8266 to demonstrate essential communications. Then he discusses the configuration options and the library he created to make like a bit easier. Following that is a series of posts discussing transmission types as well as power saving methods including sleep modes and wake-on-radio.The information will be extremely handy for someone starting off with the SX1276/SX1278 Wireless Modules which are relatively inexpensive as opposed to more standardized development kits. We love the abundance of fritzing diagrams, arduino code and helper library and hope someone will build on it. You can get the library from Github for your tinkering pleasure.If you are looking for ideas for this newly discovered skill, have a look at LoRa Enabled Mailbox as well as Electric Fence Monitoring with The Things Network for a bit of IoT action.

Source: LORA TUTORIALS FOR THE DIY MASSES







READ  A KEYBOARD INTERFACE FOR YOUR SINCLAIR ZX

Leave a Comment

*
= 5 + 9

(Spamcheck Enabled)

Read previous post:
ESPRESSO-MACHINE-NOW-POWERS-PLANTS
ESPRESSO MACHINE NOW POWERS PLANTS

This thing has what plants crave! No, not electrolytes exactly — just water, light, and moisture polling every 30 minutes....

Close
Scroll to top