A recent tour of an old WWII-era aircraft carrier reminded us how hard navigation was before the advent of GPS. It used to be the work of skilled people to sight the sun or the stars and use giant books to figure out a vessel’s position. Now you just ask your phone to listen to some GPS satellites and you have precision undreamed of with other systems. But GPS sometimes isn’t enough. Just using conventional GPS, you can locate yourself to a couple of meters. The new L5 band, which isn’t on all satellites yet, can get you to about 30cm. But if you need better — up to around 1 or 2 cm — you need to use special techniques lumped together as GNSS enhancements. [Viktor] wanted to have an Arudino -based lawnmower, but wanted to use more conventional GPS techniques along with ultrawideband (UWB) ranging tags.

Given that the ranging anchors are in the mowing area, we aren’t sure why the mower even has GPS other than to geofence so you can’t start autonomous operations until you are in range of the tags. The three anchors are placed in a triangle, so if the robot knows the distance to each tag it can use some math to locate itself inside the area quite precisely.

In addition to knowing where it is, the mower needs to learn where to cut. To do this, you have to manually drive the mower around the perimeter using Bluetooth.

Overall, a good-looking project. If you need super accuracy with GPS, it is common to use a base station and compare the phase of the received signals from the base station with those of the robot. This lets you know very precisely where you are in relation to the base station, but doesn’t tell you any more about exactly where you are than using regular GPS. Of course, if you know exactly where the base station is, that works, too.

A lot of mowers we see use an off-the-shelf motion base. This isn’t the first time we’ve seen an Arduino-based mower.


Leave a Comment

Your email address will not be published.

= 5 + 0

(Spamcheck Enabled)

Scroll to Top