The world has seen an exponential growth of the Internet of things, where things are becoming connected. Every physical object is giving the chance to be connected to the internet and emit some data about itself with just the addition of some chips, and some form of wireless interface. Your Electric kettle can basically tell you when it’s ready or even prepare itself down for you.
Researchers have estimated will we have billions of connected objects in the coming years which are already creating security and privacy concerns. Concerns like; what if my device gets hacked, infected with malware or my mission-critical device suddenly losses it’s power. What if we still could achieve this connectivity possibility without having to rely on much electronics? Researchers at the University of Washington have created a range of 3D-printed plastic objects that can communicate with a router even though they’re not connected to the internet and don’t contain any electronics.
The researchers at the University of Washington have found ways to create connected objects with only 3D printed parts and an antenna. They receive funding from the National Science Foundation and Google.
First; they design and 3D printed a combination of plastics like springs, switches, knobs, gears and copper filaments to serve as an antenna. Then, they leverage a technique called “Backscatter Techniques” to transmit the signal to Wi-Fi enabled device. Backscatter systems use an antenna to transmit data by reflecting radio signals emitted by a Wi-Fi transmitting device or a router. Information can be embedded in those reflected patterns and can be decoded by a Wi-Fi receiver. In this case; the antenna is used to reflect the radio signals back to a Wi-Fi receiving device which could by a smartphone and physical motion on the antenna, like a regular tapping cause some form harmonics on the transmitted signal, where this harmonic will serve as the embedded information.