Arduino GPS Clock usign arduino

I had a Holux M-1000B Bluetooth GPS module that was just gathering dust in my room. I had bought it from DealExtreme back in the days when I had GPS-less (but external GPS capable) Nokia E51. Upgrading to a Nokia E52 has since made this receiver redundant. However, since getting an Arduino, and being put off by the price of GPS shields for them, I decided to use the GPS receiver I already have.

Arduino GPS ClockOnce the receiver is connected to satellites, the device just spews GPS NMEA V3.01 data at you via Bluetooth SPP or a virtual USB COM port on the PC. Building Arduino projects are a bit like playing with Lego as a child – You spend hours rooting through the big box for one part (only in the case of Arduinos, it’s the delivery of parts from electronics suppliers) and when you get it, you can finally finish it. The project sits on your desk for about 1 day to be admired, and then it gets dissembled, never to be rebuild (well, unless it’s really good).

Despite opening the board up and finding the appropriate points to probe it was easier just to leave the GPS on the window ledge, and connect it to the PC via bluetooth. I could then pipe the output from the GPS serial port to the Arduino serial port. The settings for the GPS COM port are 38400 baud 8,N,1 if you want to look at what the device is sending out. Because NMEA is an ASCII based protocol, parsing programs are trivial to write. Below is a sample Linux command and some sample NMEA output sentences:

Arduino GPS Clockuser@host:~$ cat /dev/rfcomm1 $GPRMC,152926,V,6027.8259,N,02225.6713,E,10.8,0.0,190803,5.9,E,S*22 $GPRMB,V,,,,,,,,,,,,A,S*0E $GPGGA,152926,6027.8259,N,02225.6713,E,8,09,2.0,44.7,M,20.6,M,,*79 $GPGSA,A,3,07,08,09,11,18,23,26,28,29,,,,6.6,2.0,3.0*38 $GPGSV,3,1,09,07,29,138,44,08,22,099,42,09,30,273,44,11,07,057,35*75 $GPGSV,3,2,09,18,28,305,43,23,14,340,39,26,64,222,49,28,60,084,49*7E $GPGSV,3,3,09,29,52,187,48*4E $GPGLL,6027.8259,N,02225.6713,E,152926,V,S*48 $GPBOD,,T,,M,,*47 $PGRME,15.0,M,22.5,M,15.0,M*1B $PGRMZ,147,f,3*19 $GPRTE,1,1,c,*37 $GPRMC,152928,V,6027.8319,N,02225.6713,E,10.8,0.0,190803,5.9,E,S*29

 
For more detail: Arduino GPS Clock


About The Author

Ibrar Ayyub

I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough research and presenting information in a structured and logical format.

Follow Us:
LinkedinTwitter

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top