usb

RS ADDS RENESAS SYNERGY S5D3 MCU AND DEVELOPMENT BOARD

RS ADDS RENESAS SYNERGY S5D3 MCU AND DEVELOPMENT BOARD

Renesas Synergy™ TB-S5D3 Target Board Kit helps designers evaluate the operation and performance of the S5D3Microcontrollers. The S5D3 Target Board Kit offers initial firmware development and evaluation of the Synergy Software Package (SSP) on the Synergy™ S5D3 Microcontrollers. The Kit connects via a USB connector for the main MCU, or two PMOD connectors, and a selection of Pin […]

RS ADDS RENESAS SYNERGY S5D3 MCU AND DEVELOPMENT BOARD Continue Reading

LOW POWER IBQ800 QSEVEN CPU MODULE FROM IBASE WITH EXTENDED TEMPERATURE RANGE

LOW-POWER IBQ800 QSEVEN CPU MODULE FROM IBASE WITH EXTENDED TEMPERATURE RANGE

iBASE Technology Inc, a leader in the manufacture of industrial motherboards and embedded systems, is proud to announce the highly integrated IBQ800 low-power CPU module powered by an Intel® Atom™ x7-E3950 @2.0GHz or x5-E3930 @1.8GHz processor. Designed to operate at extended temperatures ranging from -40°C to +85°C, the IBQ800 is suitable for use in industrial environments and vertical market segments including automation, gaming,

LOW-POWER IBQ800 QSEVEN CPU MODULE FROM IBASE WITH EXTENDED TEMPERATURE RANGE Continue Reading

THE WIFI 5 AND BLUETOOTH 5 BOARD NOW AVAILABLE – IVY5661 IOT BOARD

THE WIFI 5 AND BLUETOOTH 5 BOARD NOW AVAILABLE – IVY5661 IOT BOARD

A few months ago, in November 2018, we talked about the possibility of combining both WiFi 5 and Bluetooth 5 into one board. The UNISOC UWP5661 was a chip that could make that possible and the same chip powers the IVY5661 96Boards IoT board. At the time of posting about the IVY5661 board and the relatively unknown WiSoC chip little information was available. The product board

THE WIFI 5 AND BLUETOOTH 5 BOARD NOW AVAILABLE – IVY5661 IOT BOARD Continue Reading

Keysight 34465A Digital Multimeter 6 ½ Digit Truevolt DMM

Keysight 34465A Digital Multimeter, 6 ½ Digit, Truevolt DMM

Keysight 34465A & 34470A DMMs offer unprecedented levels of accuracy, speed and resolution. They can measure very low current down to a 1 μA range, enabling their use on very low power devices. The ability to auto-calibrate during the measurement allows the 34465A and 34470A to maintain a calibrated measurement while the instrument may be

Keysight 34465A Digital Multimeter, 6 ½ Digit, Truevolt DMM Continue Reading

Fast and Cost Effective Evaluation of the Mass Flow Meters SFM3xxx AW and SFM3xxx D

Fast and Cost-Effective Evaluation of the Mass Flow Meters SFM3xxx-AW and SFM3xxx-D

Sensirion, the worldwide leading manufacturer of high-quality flow and environmental sensors, is launching a new evaluation kit. With the EK-F3x-CAP, expiratory and proximal sensors of the SFM3xxx platform can be tested quickly and easily. The evaluation kit works with both the disposable and reusable variants of the flow sensors. The EK-F3x-CAP evaluation kit offers a

Fast and Cost-Effective Evaluation of the Mass Flow Meters SFM3xxx-AW and SFM3xxx-D Continue Reading

ALLWINNER H6 “ORANGE PI 3” SBC WITH GBE AND MINI PCIE

ALLWINNER H6 “ORANGE PI 3” SBC WITH GBE AND MINI-PCIE

Shenzhen Xunlong Software has launched an open-spec, Allwinner H6 based “Orange Pi 3” SBC. The $30 to $40 SBC offers GbE, HDMI 2.0, 4x USB 3.0, WiFi-ac, and mini-PCIe, with the $40 SBC offering 2GB of RAM and 8GB eMMC. Shenzhen Xunlong Software earlier launched their first Allwinner H6 development board, Orange Pi One Plus for $20, but was disappointing, as the

ALLWINNER H6 “ORANGE PI 3” SBC WITH GBE AND MINI-PCIE Continue Reading

FOMU RUNS MICROPYTHON AND FITS INTO YOUR USB PORT

FOMU RUNS MICROPYTHON AND FITS INTO YOUR USB PORT

When it comes to the world of Microcontrollers, FPGAs, DSPs, or basically anything related to embedded devices, we have traditionally been accustomed to something averagely big (in regards to this domain) and even created some standards like SBCs (Single Board Computers) to categorize devices. What if we could have development boards that goes beyond the standard norms of the

FOMU RUNS MICROPYTHON AND FITS INTO YOUR USB PORT Continue Reading

Arduino Temperature controlled USB fan

Temperature-controlled USB fan using Arduino

As summer is coming, I bought a USB fan from HuaQiangBei, Shenzhen. However, when I focus myself on work(or game), I could hardly notice its existence. If I can teach it how to think and execute its duty without my order, that will be more practical and fun! So roll your sleeves and follow me

Temperature-controlled USB fan using Arduino Continue Reading

Scroll to Top