[Edward], creator of the Cave Pearl project, an underwater data logger, needed a way to measure temperature with a microcontroller. Normally, this problem is most easily solved by throwing a temperature sensor on the I2C bus — these sensors are cheap and readily available. This isn’t about connecting a temperature sensor in your Arduino. This build […]
THE NO-PARTS TEMPERATURE SENSOR IN YOUR ARDUINO Continue Reading
RTC or real-time clock is a kind of computer clock for keeping track of the recent or most current time. Commonly, RTCs are present in almost all or any device, which are electronic in nature that needs to keep time accurate. Meanwhile, temperature sensors are devices that gather data concerning the temperature from a source
In this project, we will go over how we can build a temperature sensor circuit and integrate it to an LCD so that we can get a readout of the temperature on the LCD. In previous projects with temperature sensor circuits, we built the circuit and then got a readout on the computer that we
How to Integrate a Temperature Sensor Circuit to an LCD Continue Reading
In this project, we will demonstrate how to build temperature sensor circuit using a LM335 sensor. As a temperature sensor, the circuit will read the temperature of the surrounding environment and relay this temperature to us back in degrees Kelvin. The difference between an LM335 and LM34 and LM35 temperature sensors is the LM335 sensor
How to Build a LM335 Temperature Sensor Circuit Continue Reading
In this project, we will demonstrate how to build temperature sensor circuit using a LM35 sensor. As a temperature sensor, the circuit will read the temperature of the surrounding environment and relay thi temperature to us back in degrees celsius. The IC we will use to measure the temperature is the LM35 IC. We will
How to Build a LM35 Temperature Sensor Circuit Continue Reading
You are building a soil temperature sensor. We need a waterproof thermometer that we can burry in the soil. The sensor is made up of a small circuit enclosed in a piece of heat shrink (to waterproof it). Supplies: (see the parts page) an LM335 temperature sensor a 33K and a 56K resistor a short
