Classical Pong game implemented on an Arduino Uno using a PCD8544 LCD screen which is better known as the Nokia 5110 screen. Player bars are controlled by a potentiometer for each player. If you want the bar to go left, just turn the potentiometer left. Step #1: Connect the Arduino Uno, PCD8544 LCD screen and […]
2-Player Pong Game with Arduino Uno Read More »
Want to play Pong on your computer with your Esplora? This example shows you how. This example is designed to be used with a Processing sketch. Processing is an open source programming environment. The Esplora reads the slider and buttons and sends data to the Processing sketch serially over USB, and Processing uses the incoming
Arduino Esplora Pong Read More »
Several months ago I got a really good deal on a large 32×32 RGB LED matrix display. It matches up with the wiring interface shown on the Adafruit website for their 32×32 display so I did the usual testing with their libraries. Recently I was looking for some ideas for projects for this display. One
Life and Tetris and Pong…Oh My! Read More »
I started with the Instructable from Kyle Brinckerhoff; http://www.instructables.com/id/Ardu-pong-the-Arduino-based-pong-console/ Thanks Kyle! and the following at Make magazine http://blog.makezine.com/archive/2007/08/arduino-pong.html and I see the original code is attributed to Pete Lamonica Thanks Pete!! I am using the paddles instead of the joy stick and I have made it for 2 players. Also I added some sound. I
2 player Pong using Arduino Read More »
A while ago, as my first microcontroller project, I made a Pong game on a 5×7 LED display, but then nothing became of it. Recently I was given a hard hat as part of a uniform (for an engineering competition) and told to customize it, and remembered pong. In this instructable I will show you
LED Hat Display with Pong using an Arduino Read More »
