We will guide to develop Arduino based 7 segment gps clock which will show EDT time. Accurate time is provided via synchronized clocks with the global positioning system (GPS). These clocks are ubiquitous and frequently found at bus stops, train stations, and airports. These are also frequently employed in the military. Here, we present a […]
Arduino based 7 segment gps clock EDT time Continue Reading
In this project I will show you how you can make an Arduino Touch Screen MP3 Music Player and Alarm Clock. You can watch the following video or read the written tutorial below. If we enter the Music Player we can start playing the music by pressing the big “Play” button in the middle of
Arduino Touch Screen Music Player and Alarm Clock Project Continue Reading
If you’ve ever rode the Link Light Rail in Seattle to the airport, you may have glanced out of the window while traveling through a tunnel and seen playing cards illuminated on the walls. These images are not made from two dimensional screens. Each display is just a row of lights that changes rapidly as
The Pendulum Clock Continue Reading
This project brings back the old time Analog VU Meter, with the added functionality of a neat looking clock! When you turn off your music the meters automatically swing into to clock mode. Behind it all is the popular and easy to use Arduino. This is my submission for the Make-to-Learn Youth Contest: What did
Analog VU meter and Clock using Arduino Continue Reading
Update: The Arduino system is fine; the only thing you have to take into consideration is the 9.54 hour rollover event, which Rob Faludi has provided an excellent solution for here. I made up a nice little over-analysis of the issue, available here. For a while, I’ve wanted to make a clock that can change
Controlling a clock with an Arduino Continue Reading
This project demonstrates building a real-time clock (RTC) with temperature display using an Arduino, DS3231 RTC chip, and SSD1306 OLED display (128×64 pixels). The DS3231 RTC chip provides more accuracy than the DS1307 and incorporates an onboard temperature sensor. It maintains timekeeping even without the main power, making it well-suited for this application. It communicates
Help keep your IoT pet alive via the Internet! Story If you had an IoT pet, what would it eat? WiFi SSIDs, of course! The Nerd is a wireless electronic pet that survives by collecting WiFi SSIDs along with some rest and sunlight. In order for it to thrive, you must balance offline and online
If you’ve poked around the internets where electronics hobbyists collect, it is likely that you are acutely aware of our incontrovertible affinity for building timekeeping clocks. It is similarly unlikely that you have been able to evade the plenitude of nixie tube based projects. There is a reason for this. Nixie tubes are cool. They
Nixie Tube Clock Continue Reading
Clocks are a favourite project here, and we can say we’ve seen all conceivable types over the years. Just a software clock on a retrocomputer perhaps isn’t the coolest among them, but [Willem van der Jagt ]’s Apple][ clock has a little bit extra. It takes its time reference from a real pendulum, on an antique
AN APPLE ][ WITH A PENDULUM Continue Reading
Back in 1978, the world was a bit different. There was no Raspberry Pi, no Internet, and not even an ESP32 to build projects with. And rather than order electronics kits from Tindie or Adafruit, [Dr. Francitosh] selected this binary clock with his mother from a catalog, and made the order via mail. Simpler times. The
BINARY CLOCK KIT BLIPS AGAIN Continue Reading
