Use a Classic Nintendo controller to lock and unlock your door! The output from the Controller is read by an arduino and it looks for a particular combination of buttons, once the combination is entered it sends a signal to eject a Cd-Rom Drive which pushes or pulls the lock. I started making this project […]
Nintendo Keyless Entry System using an Arduino Continue Reading
This was originally going to be a tutorial on how to hook up a pumpkin to the internet so that the lights inside it could be controlled via twitter, text message, motion or more. To get started I carved a pumpkin for the first time in 20 years. Needless to say I was proud of
The Jack’O Lantern Early Warning System using Arduino Continue Reading
In this tutorial you can make an RFID access system. It’s very simple and can be used with a wide variety of end-uses. Updated 18/03/2013 The purpose of this project is to prototype a basic RFID access system. Although it is not that complicated, this article is my response to a kit reviewed in the Australian “Silicon
Simple RFID access system using Arduino Continue Reading
If you’re a student, like me, then you have heard of all the theft that occurs on campuses today. I can’t even leave my backpack alone for five minutes without worrying about it getting stolen. To ease my mind and to help fellow students, I’ve designed a backpack ant-theft alarm. When activated, this device senses
Backpack Anti-Theft Alarm using Arduino Continue Reading
The project This project follows on from the excellent work by ScotSEA and his Arduino reset program (see http://www.instructables.com/id/CatGenie-Resetting-a-SaniSolution-Cartridge/ ). I had never taken my Catgenie apart as Scott did, but had built a small contact board instead. I had previous updated Scott’s program to so that it output some debugging output to the computer
CatGenie: A smart, resettable SaniSolution cartridge Continue Reading
In this tutorial I will show you how to make gas leak alert security alarm using arduino nano and mq 5 gas sensor Description Introduction A gas detector is a device that detects the presence of gases in an area, often as part of a safety system. This type of equipment is used to detect
How to make gas leak alert security alarm using arduino Continue Reading
Are you constantly being scared when people sneak up behind your back? Do you have bad hearing and can’t hear people approaching you? Do you want to just build a super fun Arduino project? If you answered yes to any of those questions, then this project is for you! I have a workbench in my
DIY Motion Sensor Alarm System Continue Reading
Not even Zombies are exempt from a good pat-down. Scanner security wands are used at the most exclusive nightclubs and venues. Does not detect metal to indicate a presence of weapons but will indicate the lack of a soul which means a more rigorous body cavity search to remove any last shred of dignity you
TSA Zombie Scanner Security Wand Continue Reading
Hey guys and welcome back, This is my DIY Security Cam which is made from an ESP32 connected with a 5V Charger circuit that converts 240V AC into 5V DC for ESP32 to run. The goal for making this project was to make a cheaper alternative to the existing WIFI Security Camera. Also, huge thanks
DIY ESP32 Security CAM Continue Reading
We created this project for MSReva as an assignment from school. Supplies Laser or print all parts (see githup): printed parts: 1x: 14 lock pin sleeve large 1x: 15 lock pin sleeve smal 1x: 17 lock counter pin 1x: 18 pin shooter 14x: 19 tray shelf 4x: 22 leg mounting corners 4x: 22.1 mounting brackets instead
Medicine Safe Continue Reading
