This sketch provides a pinball machine controller as an extended example of a real-time logic controller utilizing third-party hardware drivers. It is configured to use hardware in the PinballShield circuit board. This sketch assumes you have already installed several third-party Arduino libraries in your IDE as described in the section Arduino Libraries. All other sketch files
Arduino Sketch PinballGame Continue Reading
This Power Timer is based on the timer presented at: https://www.instructables.com/id/Timer-With-Arduin… A power supply module and an SSR (solid state relay) were attached to it. Power loads of up to 1KW can be operated and with minimal changes the load power can be increased. The choice of timer duration or program number is set from
Power Timer With Arduino and Rotary Encoder Continue Reading
Have you ever wondered why smartphones are called smart-phones? Because they are smart, right? They do some works automatically, smartly. That’s the short answer. I was thinking something, even if computers are a lot more powerful than phones, why aren’t they smart! For instance, mobile phones have automatic brightness control system, which is handy and
Hack Computer to Make It Smart! Continue Reading
There is no amazing story behind this project – I just always liked the boxing machines, which were located in various popular places. I decided to build mine! Step 1: Designing In the beginning, I designed a 3d model of my device. Boxing pear, frame, case and additional parts. Based on the dimensions of this
How I Made My Own Boxing Machine? Continue Reading
Here comes a simple Graphic Equalizer showing 14 audio bands from 60Hz up to 16kHz. It consist of a PCB based on MSGEQ7 and ESP dev board. Since a MSGEQ7 chip recognizes 7 bands only and an ESP dev board gives us a chance to read a single analog input only, there was a trick
14band Graphical Equalizer Continue Reading
This project was designed for my dog, who refuses to drink from a water bowl. She often sits by the tap for hours waiting for someone to pass and open it for her. So I built her this automatic tap that opens when it senses her and closes again when she’s out of range. The
Automated Arduino Tap Continue Reading
Seeing smart home products being more common in our lives, I’ve started to think about the relationship between people and these products. If one day, smart home products become an indispensable part of everyone’s life, what attitudes should we take to coexist with them? How are we going to treat them? We like to call
Living Pixels – Imagine Technology Has Life Continue Reading
This Instructable will show you how to make an atmosphere lamp that lights up just like making little waves on the water surface. It can be placed on your table, shelf, or bedside to create a harmonious atmosphere, bringing an absorbing experience to the user. To do this, you’ll first want to gather the following
Water Surface Lamp Continue Reading
This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com) tep 1: Materials List In order to begin the project, you first have to know what you’ll be working with! Here are the materials you should have before you begin: 1x Arduino Uno R3 microcontroller
Gyroscope Platform/ Camera Gimbal Continue Reading
I hope you will find this Instructable interesting and useful. It is only three (3) steps long, plus an introduction. If you do find this article helpful, even if it is relative to when you see it some months or years old, please be kind enough to mouse click “Favorited” at the top of this
Simple Inexpensive Wireless With Any IR Remote, Including No Longer Used Ones Continue Reading
