Recently from few years people have started focusing on modernization. So in this project “SMART PARKING SYSTEM” everything is based on modern idea, and through this project we also tried to short out space related problem which usually occurs in parking. What’s all about the Project? As we know, now the time is changing and
SMART PARKING SYSTEM Continue Reading
After completing my GSM Home Alarm V1.0 and some time of using, I decided to make some modifications. In the hardware the main changes are the replacement of the ultrasonic sensor and the introduction of a keypad. On the software, I change the SMS notification by e-mail. Also I decided to scale down the circuit and design
Thousands of lives are being lost every year due to IEDs (improvise explosive devices). IEDs were responsible for approximately 63% of coalition deaths in Iraq. ABSTRACT Mobile Explosive Containment Vessels (MECV) referred to as Total Containment Vessels (TCV) are fully enclosed vessels used to absorb the explosion forces the enclosure is spherical and made of
Disposing IED using Non Newtonian Fluid Continue Reading
I made a lot-based plant monitoring device. From this device, you can measure the condition of your plant from anywhere in the world. The device is able to measure temperature, humidity, and soil moisture. Description I hope you are doing well because a few days ago I recovered from the virus. In the pandemic we
Avengers plant monitoring device with Arduino uno (Tuya IoT platform) Continue Reading
It’s been a long time since my previous tutorial, my work is quite busy and I spend less time on Instructables. This time is a project that I like very much since my first saw it on Kickstarter: Air Bonsai. I was really surprised at how the Japanese made it, really a beautiful and mysterious piece.
Arduino Air Bonsai Levitation Continue Reading
The smartwalker is being developed for a project called “design for everyone” at Howest university college of Applied Sciences (Belgium). We are a group of design and occupational therapy students. This project is specifically made for an individual person: Peter. Peter can’t see nor hear. When he goes to the train station he relies on his
SMARTWALKER D4E1 Continue Reading
This project was completed by Alexandra Pittiglio & Christelle Feghali for our Computational Design and Digital Fabrication ‘Useless Machine’ Project, Semester 2, ITECH M.Sc Programme ——– We present Plant Bartender, a 2-axis robot that senses and waters in the most inefficient way. This device utilizes soil moisture sensors to identify the thirst levels of multiple
Plant Bartender Continue Reading
With 2020 being the year of COVID, having a toddler that was stuck at home (especially during the winter) presented the need for, well, stuff to do. So, my wife and I decided to turn our basement into a play place for our little girl. We started by designing and building an indoor slide with
PlayPlace Lighting Using NeoPixels Continue Reading
Have an awesome project in mind using some LEDs. In that project I will be using some LED Fading Effect and few LED Chaser Circuits. But before jumping onto that, I thought I should create a short tutorial and show you guys how to fade a LED with or without an Arduino automatically or manually
LED Fader – With or Without Arduino Continue Reading
Francisca Molero Luque, Dolores Martín Cabrera and Laura Mejía Ospina, students of ‘Creative Electronics’, a Beng Electronics Engineering module at the University of Málaga, School of Telecommunications. We decide to make as final project a derivation of Interactive Geodesic LED Dome. Supplies – NeoPixel Digital RGB LED Strip – IR sensors – 470 Ohm and 10K Ohm
