The ‘Poduino Case’. A protective case for your Arduino (with breadboard work area): I just received my Arduino Duemilanove and breadboard today. After some careful thought, I realized there is no way this thing could possibly survive daily life on my desk. I saw some great Instructables on plastic cases, and even one that used
Here’s a six word tragedy: My arduino needs four AA batteries. Really? Isn’t this 2012? Where’s my jetpack?!! Here’s a way to the future — a way to make a solar panel, from scratch, that can power any arduino off of sunlight or even light in your house. Sort of a peel-and-stick power source for
Solar powered arduino on the back of a playing card Continue Reading
I recently bought an Arduino Diecimila board. It’s awesome and the applications, you can use it for or with is almost unlimited. However there’s a problem when you want to use it in portable applications. You can use the Liquidware lithium backpack, which is a good way to power the Arduino. There’s a problem with
The Arduino AA Undershield Continue Reading
Hey everyone, I wanted to share a project I just finished up. I built a super secret locking box for my girlfriends little brother. He has a knack for creative lego building so I thought it would be a good idea to open him up to the Arduino as soon as possible. The super secret
Super Secret Lock Box w/ Capacitive Touch Continue Reading
So my boss came to me one last week and said he wanted to scare the trick-or-treaters who came to his home, and the kids who would come to work during a special Halloween Walk the community does. Thus was born the talking pumpkin. In short, I used an Arduino, an SD card read/writer, and
Talking Pumpkin Continue Reading
This semester at college, I am in a class called Computing and Craft which is about incorporating circuitry and micro-controllers and craft to bring our projects to the next level. For our first big project, I decided to make a raincoat the reacted to light and water. Being from California and going to school in Massachusetts has
Light and Water Reactive Raincoat Continue Reading
The idea of this dress comes from a series of tweets with online friends @shineslike and @arduinogirl. @shineslike and I had taken a half day Arduino workshop given by @arduinogirl at the MCN 2011 conference. I was immediately inspired creatively by the sensory and interactive opportunities. Over the next few months I struggled with the electronics
Making the TFF: a dress that gets excited when tweeted Continue Reading
In this example, you will use your Ethernet Shield and your Arduino to send and receive text strings via the UDP protocol (Universal Datagram Packet). You’ll need another device to send to and from. The Processing sketch included at the end of the code will send to and receive from your Arduino running this example.
Sending and Receiving String via UDP using Arduino Continue Reading
This Instructable shows you how to build a micro-controller based weather monitoring device. Built on the Arduino Uno board it can easily be extended and modified should you have additional sensors at hand. Main requirements: – Measure temperature (accuracy +/- 0,5 degree Kelvin) – Measure barometric air pressure (+/- 0,1 Pascal) – Display measured values
Weather Monitor Continue Reading
I used the Arduino UNO combined with three LumiGeek shields to run lighting. LumiGeek has dedicated shields to support 1 Watt RGB LEDs that require constant current, Addressable RGB LED Strip, and Non-Addressable RGB LED Strip. Step 1: 1 Watt RGB LEDs (2x) I wired these in series and powered them with the 12 Volt
Blinky Lights using Arduino and LumiGeek Continue Reading
