I have wanted to build my own robot for awhile now. But after many tried and failed attempts, I was losing hope that may ever happen. I discovered that there wasn’t a small, robust, super easy to add-on to, robot that was within my budget to get. After hours of research and many robot kits later, i […]
DIY Low Cost Arduino Mobile Development Platform Continue Reading
ICStation team introduce you this APR9600 voice recording and playback system used in elevator based on the ICStation Mega2560 compatible with Arduino. It uses DC5V voltage to work. When you press the different keys, the loudspeaker will sound that which floor you arrive. This design uses a APR9600 voice chip as the core of the
The idea of this dress comes from a series of tweets with online friends @shineslike and @arduinogirl. @shineslike and I had taken a half day Arduino workshop given by @arduinogirl at the MCN 2011 conference. I was immediately inspired creatively by the sensory and interactive opportunities. Over the next few months I struggled with the electronics
Making the TFF: a dress that gets excited when tweeted Continue Reading
I have been working on this project for a while and whilst it is still under development I decided to write a short guide after several requests to do so. The dimmer uses an interrupt driven XL-Maxsonar EZ1 ultrasound range finder to measure the distance between the sensor and your hand. By moving your hand
Ultrasonic Dimmer (Without Humming Or Buzzing Noise) Continue Reading
So what I want to do here is do several things with two LEDs with speech recognition I’m using bitvoicer you can get it here Step 1: Part List So I’m doing this with as little parts as I can, here’s the list: Green LED Red LED Breadboard 1k Resistor Jumper Cables Computer Computer Mic(you
Control Two LEDS with an Arduino and bitVoicer Continue Reading
In this section we will explain exactly how you can create your own Amblone setup, consisting of 3 RGB LED strips and an Arduino Mega. What do I need? To create the Amblone setup described in this guide, you will need the following: Amblone software An Arduino microcontroller, for example the Arduino Mega A USB
DIY Guide for Amblone LED Light Continue Reading
So my boss came to me one last week and said he wanted to scare the trick-or-treaters who came to his home, and the kids who would come to work during a special Halloween Walk the community does. Thus was born the talking pumpkin. In short, I used an Arduino, an SD card read/writer, and
Talking Pumpkin Continue Reading
I began this project with the objective of cheaply turning my RC helicopter into something of a UAV or at least to fit some sensors to reduce collisions and other “mis-haps.” Now unfortunately at the beginning of the project i miscalculated my little helicopter’s lift capabilities and so with the equipment fitted it has insufficient
Hello Everyone. This is my very first Instructable so please go easy on me. This was more or less a test project to see if my new arduino board worked. Any friendly advice will be greatly appreciated so my future posts can be even better. I am going to show you how to create the
Super Amazing Button using Arduino Continue Reading
Welcome to my FIRST instructable, i will show you how to connect a 16×2 lcd display to an arduino, follow these simple step by step instructions and you will have it done in no time 🙂 Tools Needed : Soldering Iron Wire Strippers Pliers Soldering Iron Flux ( Liquid Or Solid ) Soldering Iron
Connect A 16×2 LCD Display To An Arduino Continue Reading
