I’m working together with my wife. But sometimes one of us has an external appointment. So, if one of us is thinking about the other, we want to show it together. For this, I have made an Love Gauge for us. It stands on our desktop, or you can carry it somewhere else, cause it
Love Gauge Using Arduino Continue Reading
I always wanted an old traffic signal and finally got one recently. However, it was very simply wired so that all the lights were fixed on. What fun is that? I also wanted to try out an Arduino controller and thought this would be a nice simple project to incorporate it into. This Instructable will
Traffic Signal / Stop Light Wiring with Arduino Controller Continue Reading
Hello, Here is a simple hexapod that can be built by hand very quickly. The mechanical design is not great, but it is very much in the KISS (keep it stupidly simple) style and should be doable in a weekend for builders of novice to medium experience. I won’t be improving this project any time
Simple 18dof Hexapod, Arduino nano (optionally with pololu maestro) Continue Reading
Impressed by these two LEGO® Dragster sets, a 250 pieces LEGO®TECHNIC Dragster 8847 (released in 1983) and a 391 pieces Top Fuel Racing 5533 (released in 1999). These two Dragsters inspired me to build my own LEGO® dragster, the “12 Thumbs”. The name “12 Thumbs” came after I finished the design. While I was playing with my finished
“12 Thumbs” R/C LEGO Dragster Continue Reading
This Instructable is part 3 in an Intro to MaxMSP series I’ve just finished teaching atWomen’s Audio Mission in San Francisco. Part 1 is an introduction to MaxMSP and MIDI, part 2 is intermediate Max and Audio, and this Instructable is all about interfacing MaxMSP with hardware. I recommend at least skimming over my last two instructables before
Create Interactive Electronic Instruments with MaxMSP Continue Reading
Hey dudes! Lets build the trinity synt! ! More information about the synth at: www.bastl-instruments.com Before you start: the board solders from both sides and the component goes always above its printed sign so it hides the sign! You should know that there are some differences between some of the versions. SQNCR has more buttons
Trinity Assembly Continue Reading
An Arduino based Ambient Orb designed explicitly for monitoring Source Code Autobuild systems. This orb can easy be repurposed for monitoring really anything that can have alerts from time to time. Step 1: Purpose Some time ago a co-worker passed me an article about “Extreme Feedback” devices that could be attached to your autobuild system
Arduino Orb Build Warden Continue Reading
I created this Theremin like device after seeing this article in Make magazine: http://m-cdn.dashdigital.com/make/vol15/?pg=69#pg67 While this looked pretty straight forward it turned out to be a bit much for me at the time. But after much effort, I got it to work pretty good. I had trouble getting the laser to aim correctly so I
Theremin with Zapper,laser,Arduino Continue Reading
Measuring the consumption of a resource that has units by volume can be more tricky than it sounds. Use of resources such as water, gas, and even electricity is typically measured by gauges that determine either instantaneous flow rate or cumulative volume over time. Both techniques have problems: measuring flow rate at frequent intervals allows
Water Flow Gauge using Arduino Continue Reading
Arduino & Visual Basic 6 Light Controller This project illustrates an early attempt at bridging Visual Basic 6 (VB6) with the Arduino platform through serial communication over a USB interface. While the concept originated as a beginner’s exercise in VB6 after only two weeks of learning, it highlights important principles of cross-platform interaction, string parsing,
Arduino & Visual Basic 6 Light Controller Continue Reading
Free Arduino projects, circuits, code and tutorials. Pick a board, pick a sensor, build something.
