Responsive Pneumatic Envelop (A useless machine) Mockingly inspired by the blowfish, Bounce Back builds on state of the art bubble wrap shipping envelops by only inflating its bubbles when frightened by rough handling. Inversely, when the package is not being shuck, it will not inflate itself. Creators: Christian Gotthilf Steixner, Ayşe Esin Durmaz Bounce Back! […]
This was my first animated Halloween prop. I found this witch at the local hardware store. It was meant to hang up by a cord and if someone came close to it, an infrared sensor would trigger the prop. The prop has LED eyes that would light up and it would trigger a voice tract
Halloween Pop-Up Prop Continue Reading
This is meant as a guide to anyone soldering their own Arduino from a kit, which can be purchased from A2D Electronics. It contains many tips and tricks in order to build it successfully. You will also learn about what all the different components do. Read on and learn what it takes to build your very
Building a DIY Arduino on a PCB and Some Tips for Beginners Continue Reading
Hi There, Recently, I finished up on my DIY project Wilson: the IoT hat. Because of the big fun I had creating and using this IoT hat, and given the wonderful feedback it provided to the wearer, I really want to share this project with you. Wilson is a hat equipped with a multicolor LED
Wilson – the IoT Hat Continue Reading
Autonomous centraline with an esp8266 that grab and store data from inverter and show charts and various data of production and can send notification email if there are some problems. It is a quite user-friendly browser based monitoring solution, It’s allows to track energy produced on a solar power plant in a simple and intuitive fashion. It’s can track key energy metrics as well as the
Inverter Aurora ABB (Power One) Web Monitor (WIM) With Esp8266 Continue Reading
Hi guys. In this instructable, I will teach you how to build an obstacle avoiding robot. The robot will be a small and simple 2-wheeled car which will move forward until it detects an obstacle in its path. Upon doing so, it will stop, move a little back and then look towards its left and
How to Make Smart Obstacle Avoiding Robot Using Arduino Uno Continue Reading
This instructable will show how to monitor EC, pH, and temperature of a hydroponics setup and upload the data to IBM’s Watson service.Watson is free to get started with. There are paid plans, but the free plan is more than enough for this project. Step 1: Things You’ll Need Any ESP32 development board. This one seems reasonable,
IoT Hydroponics – Using IBM’s Watson for PH and EC Measurements Continue Reading
This Arduino project is a simple and fun project you can build in 10-15 minutes. The result of this make will be an Arduino audio player that plays “.wav” files. It consists of a speaker, a simple transistor acting as an amplifier, and a micro-SD card adapter with a micro-SD card in it where the .wav
How to Make an Audio Player with Speaker Using the Arduino Uno! Continue Reading
I wanted to make something for them to help the visually impaired become independent, so I created an open source Arduino project for a Smart Cane. This Arduino smart cane can assist with walking alone in new environments by taking inputs through an obstacle sensor (ultrasonic sensor) and providing feedback to the person through haptics
How to make a Smart Cane for the Visually Impaired with Arduino Continue Reading
Not the simple “Hello World” app but a semi-serious play with the MKR1000. Things used in this project Hardware components Arduino MKR1000 × 1 Relay (generic) × 1 Story I won a MKR1000 at the Hackster contest and I got it on my mailbox so I said to myself .. lets keep my promise and
Hello World with Arduino/Genuino MKR1000: Relay Board and AP Continue Reading
