Send information to Santa Claus about the status of the gift request. Things used in this project Hardware components Arduino MKR1000 × 1 SparkFun Pushbutton switch 12mm × 1 Jumper wires (generic) × 1 Resistor 10k ohm × 1 NeoPixel strip × 1 Software apps and online services Arduino IDE IFTTT Maker service Google Firebase […]
Dash Button Santa with Arduino MKR1000 Continue Reading
There are many GPS satellites around the Earth which are used to provide the exact location of any place. Along with the location coordinates (Latitude and Longitude), it also provide other data like time, date, altitude, direction tracking angle etc. We have already learned to read this GPS data from Satellite using Arduino. So we
Arduino GPS Clock Continue Reading
This circuit is designed for tracking the location of vehicles. Most oftracking systems are made by using GPS. This is very simple and cheap. Tracking systems are mostly used by fleet operators for tracking a vehicle location, routing and others. This is a very good method for preventing our vehicles from stolen. This tracking system
GPS and GSM based Vehicle Tracking System Using Arduino Continue Reading
This project describes how you can build a mobile real time GPS tracker with integrated Google Maps. I began this project mainly to see if I can integrate all the different pieces of hardware and software to make a workable solution, and it took some time, but finally when everything was said and done, it
Real Time GPS Tracker with Integrated Google Maps Continue Reading
Every single location in the entire globe can be specified in terms of geographical coordinates. The geographical coordinate is a system which specifies any given location on the earth surface as latitude and longitude. There are devices which can read the geographical coordinates of a place with the help of the signals received from a
How to Interface GPS with Arduino Continue Reading
This project and future projects can be found at my website http://revoltlab.com/ where you can also find my blog. UPDATE LOG: NOW SUPER SIMPLE TO REPROGRAM! Easy FTDI USB interface hardware explained in step 10 Easy FTDI USB interface programming explained in step 13 NEW code uploaded works perfectly with speaker output! see step 13
The Traveling Geocache using Arduino Continue Reading
[INTRO] This past semester, I decided to build a GPS receiver with an iPhone app that tracks it for my semester project. Here is a step-by-step tutorial to show you how you can build your own. [OVERVIEW] Architecture of my Real-Time GPS Tracker project. I’ll be using the diagram above to explain how the project
Real-Time Arduino GPS Tracker with iPhone app Continue Reading
This was easily the most time I’ve spent producing an Arduino Tutorial. I’ve been sporadically walking around NYC with this Arduino GPS for weeks as I’ve tweaked the code and gotten it just right. If it wasn’t obvious from the title, this tutorial will teach you how to use an arduino paired with a GPS Module
Arduino GPS Tracking System Continue Reading
The device is based on a GSM/GPRS module with included GPS. Its main function is to detect and communicate its own geographical position using, on the choice, the cellular phone reference system or the GPS. Its small dimensions are due to the use, for the first time, of a GSM/GPRS module integrating the GPS receiver.
Localizer with SIM908 module using Arduino Continue Reading
Shield for Arduino designed and based on the module GSM/GPRS SIM900 or the GSM/GPRS & GPS module SIM908, to make calls, voice and data connections via GPRS. HARDWARE INNOVATIONS This new version (old Arduino GSM shield) has several new hardware features, that allow maximum customization and provide many configurations. We begin with the supply circuit
GSM GPS shield for Arduino Board Continue Reading
