My questions for the Make-to-Learn Youth Contest 🙂 What did you make? This goal of this project was to take commonly available electronic equipment and create an inexpensive, self-controlled vehicle. In simpler terms, this is an attempt at basic autonomy. It uses an arduino logic board coupled with a cheap remote control car along with
Autonomous Arduino Car Continue Reading
Drifter is based on a cheap RC toy car I found at Toys’r’us, named ‘Fast lane Monster Drift’. I think it’s the same model Frits has been used in an episode of TLIHR. It doesn’t work well, you get what you pay for. But it is a good hacking platform. There is no much space left for
Drifter – Arduino controlled RC car Continue Reading
Arduino Police Strobe Light effect, another simple variation of blink code. Arduino Police Strobe Light effect, another simple variation of blink code. Parts List; 1) 2x 5mm red LED 2) 2x 5mm blue LED 3) 1x Arduino 4) 4x 330Ω resistor 5) 1x 10kΩ potentiometer 6) Jumper wire Instruction; 1) Connect all LED as diagram
Arduino Police Strobe Light Code Continue Reading
As seen in MotoGP Race, the rider is seen riding through corners while laying aside his bike to the left and right. But there is an interesting moment when the motor looks to collapse sideward, the front views remain horizontally. How could that be? Such onboard camera applies GYRO system, where the camera will be
Gyro Camera for Motorcycle using Arduino Continue Reading
Build a simple Arduino powered Traffic Light with us! This instructable is meant to walk you through almost every step, but there are a few assumptions. Read over the intro and the first step to make sure you are fully prepared! This is the breadboard version, a more realistic traffic light will be generated soon.
Arduino Street Traffic Light – Breadboard Edition Continue Reading
This instructable shows how to modify an inexpensive RC car so it can be controlled by an on-board microcontroller. You can program the controller to make the car do any number of driving patterns and stunts. Once you have the car being controlled from the on-board controller, you can add sensors for light and sound
Autonomous Control of RC Car Using Arduino Continue Reading
OBJECTIVE Cheap Chinese RC toy cars can be had for about 5 Euros in the local market. The wireless brains behind the majority of these cheap RC toys is a pair of very cheap ICs the TX2 and the RX2. Yup, that’s what they are called. So this tutorial is focused on the TX2/RX2 based remote controlled toys.
Arduino controls cheap RC car transmitter Continue Reading
My car has only parking sensor for the Reverse, so when I enter the Garage there is no way to know if I am close enough to the wall to allow the door to close or too close that I can hit the wall with the car. So, decided to build a parking sensor that
Simple Parking Sensor using Arduino Continue Reading
This is a beginners project for the Arduino. I am using the Arduino Uno but should work with little or no modification on other arduino models. Setting up the hardware is very easy. This project is more of a training tool for learning how to program a timer list while listening for a button press. Parts
Traffic Lights Beginner Arduino Project Continue Reading
This was one of the first programs i wrote for the arduino after having it a few days 🙂 we will be making l.e.d police lights with minimal materials Step 1: You will need. You will need Arduino (or suitable clone) Breadboard 2x 240ohm resistors 1x Clear Red l.e.d 1x Clear Blue l.e.d Some Jumper
Simple Arduino L.E.D Police Lights Continue Reading
