Summary of Plug And Debug With ScanaQuad SQ200 Logic Analyzer and Signal Generator
The ScanaQuad 200 is a high-performance, cost-effective logic analyzer and digital pattern generator ideal for hobbyists. It features four channels with a sampling frequency ranging from 10KHz to 200MHz and supports various serial protocols like UART, SPI, I2C, USB, and CAN. The device allows simultaneous signal capture and generation using ScanaStudio software, enabling users to program complex sequences via JavaScript and create custom protocol decoders. Its input bandwidth reaches 50MHz with a resolution of ±5ns, making it a versatile tool for debugging and testing logic signals at an affordable price compared to traditional oscilloscopes.
Parts used in the ScanaQuad 200 Project:
- ScanaQuad 200 Logic Analyzer
- ScanaStudio Software
- Four User-Defined Ports
- JavaScript Programming Interface
- Predefined Protocol Decoders
- Custom Protocol Decoder Creator
The ScanaQuad 200 by Ikalogic is a high-performance 4-channel logic analyzer and digital pattern generator. It is designed to be the best companion of a hobbyist when working on serial protocols like UART, SPI, I2C, 1-Wire, USB, I2S, CAN, LIN, RS232, RS485, and more. With the ScanaQuad 200 Logic Analyzer, you can capture signals, you can play them back, and you can even program genuine test signals using ScanaStudio software and generate them.
Being able to capture and generate logic patterns simultaneously with a single tool, it is quite useful while testing and debugging logic signals. Now, you can achieve these same features with modern function generators and oscilloscopes. But unfortunately, these devices usually carries a price that puts them out of reach of those who only need them occasionally. So, the ScanaQuad is the best and the cheapest solution for hobbyists.
The sampling frequency of the ScanaQuad SQ200 is minimum 10KHz and maximum 200MHz, with 50MHz of input bandwidth. It has a stunning sampling resolution of ±5ns only. SQ200 is capable of handling ±15V input signal in continuous signal mode and the ±50V input signal in 10ms pulse mode. The function of the four ports of this logic analyzer can be defined by the user with the help of the ScanaStudio software. The user can also control pulse width and duty cycle of the output signal. Complex data sequences may be programmed to simulate several communication protocols using JavaScript. ScanaQuad SQ200 comes with predefined sets of various protocol decoders. This logic analyzer even allows users to create their own protocol decoders.
The following table shows the input characteristics of SQ200:
Read more: Plug And Debug With ScanaQuad SQ200 Logic Analyzer and Signal Generator
- What protocols does the ScanaQuad 200 support?
The device supports serial protocols including UART, SPI, I2C, 1-Wire, USB, I2S, CAN, LIN, RS232, and RS485. - Can the ScanaQuad 200 capture and generate signals simultaneously?
Yes, the tool allows users to capture and generate logic patterns simultaneously with a single device. - What is the maximum sampling frequency of the SQ200?
The maximum sampling frequency is 200MHz, with a minimum of 10KHz. - How can users create custom protocol decoders?
Users can create their own protocol decoders or use predefined sets available within the system. - Does the ScanaQuad 200 support programming complex data sequences?
Yes, complex data sequences can be programmed to simulate communication protocols using JavaScript. - What is the input bandwidth of the ScanaQuad SQ200?
The device has an input bandwidth of 50MHz. - Is the ScanaQuad 200 suitable for hobbyists on a budget?
Yes, it is described as the best and cheapest solution for hobbyists compared to expensive function generators and oscilloscopes. - What voltage levels can the device handle?
It handles ±15V in continuous signal mode and ±50V in 10ms pulse mode.
