I used: an Arduino Uno a Parallax PIR Motion Sensor and a Seeed Studio SD Card Shield Arduino, shield, sd card, logging shield, storage, logger Check out This instructable on PIRs in case you didn’t know what it is: http://www.instructables.com/id/PIR-Motion-Sensor-Tutorial/ Step 1: Connect your PIR Sensor Hook up the PIR Sensor Ground pin to Ground […]
Digital pins 1-7 are generally used as input pins and Digital pins 8-13 are used as output pins. Digital pins 9-11 can be used as analog output pins. That is, they can send they can send signal of variable voltage. 5/15/2012 Getting started with Arduino. I have skimmed through the “Getting Started with Arduino” and
Ah yes. It has been a long time since I posted an Instructable…well here goes: It has been a while since I have been otivated to write an ‘ible. During this idle time I have been writing, rewriting and editing code as well as designing lots of PCBs. For my new ible which I have
Vinyl cutters are used in the sign writing industry, and are great for making stickers, signs and graphics. I would like to thank Instructable members silverjimmy and Groover for their fantastic laser cutter instructables, without which I would not of been able to complete this project. My idea is to take an old printer and
Have a problem with my wireless bridge. It works for a some time then, despite it saying everything it fine, refuses to connect wirelessly. All it needs is to be turned off and on again and it works again (for a while!). I decided that what was needed is some form of circuit to reset
Have you ever wanted a little plant to brighten up your desk or home, but you’re afraid that you’ll forget to water it? Fear no longer! Using an Arduino, a scavenged wall-wart, and a peristaltic pump, you can set up your plant to be watered as often as you like, from a jug or any
Automatically water your small indoor plant using Arduino + pump Continue Reading
This page maintains the necessary documentation (hardware & software) for recreating the Solar Hardware Module (“Solar Module”) using either Arduino UNO or TI Launchpad. Prior to creating the solar module, we performed several experiments using a custom built solar panel fixture. For more information on the solar panel fixture, see link below. Solar Panel Fixture
Solar Module Using Either Arduino UNO or TI Launchpad Continue Reading
This Arduino-powered vocal effects box pitch shifts and distorts incoming audio signals to produce a wide variety of vocal effects. This project is my first experiment with real-time digital signal processing using Arduino. It samples an incoming microphone signal at a rate of about 40kHz, manipulates the audio digitally, and then outputs 8 bit audio at 40kHz.
In many cases switches are just switches. They directly control the flow of electricity to an appliance, flashlight or mains-voltage lamp. An example of this is the switch on the wall in your living room. In many cases nowadays however, switches are digital sensors, meaning that instead of directly controlling a high-powered device, they are
Our final project for ECE 4760 provides a simple but effective exercise monitoring system of the user’s walk or run. With an increase of the number of health conscious individuals hoping to remain fit, we designed a system that allows the user to keep track of his or her total number steps, current speed, and
Simple and reasonably accurate pedometer system Continue Reading
