In this article we are going to take a detailed look at how to build the driving circuit for the 8x8x8 LED cube. In other words we are going to design and analyze the circuit which translates the signals coming from the Arduino to appropriate currents passing through each of the LEDs, so that the […]
ArduSensors are open source plug-in-play sensors for Arduino. These were originally made for beginners to get started with Arduino, a very cool electronics prototyping platform, but anyone can use them. I still play around with them all of the time, and I bet a ton of people that are experienced with electronics still love them. […]
Using an ATmega 2560 and therefore the heart of Arduino, we have developed a universal remote control with GSM. This allows to control 2IN/2OUT, DTMF key, gate control and GSM thermostat activated remotely. We have already presented several remote control with different functions. But now we want to present the best remote control ever made […]
My wife bought me a Hasbro Interactive R2D2 Astromech Droid for my birthday a few years ago after I said how much fun it would be to hack it and I’ve finally managed to get inside and start playing!Although the built-in voice control functions are fun and cool to play with, and our 2 year […]
Introduction Ardu-Bot-Tom is a fun project created to show you how you can use wireless transmission modules to send commands to your robots, also it touches some specific subjects such as, servo interfacing and programming, joystick value mapping and the calculations required to determine which way the joystick is pushed, using the Serial Monitor to monitor and debug your robot’s […]
The 74HC595 is an easy and inexpensive (at about 60 cents apiece) way to increase the number of digital out pins on your Arduino. In this tutorial I’ll show you how to drive up to 16 LEDs with one 74HC595 using a technique called multiplexing. In the end, all 16 LEDs will require only three […]
In this project, we will go over how to build an arduino LED flasher circuit. We will use a standard arduino board, doesn’t matter which, and connect it so that it flashes an LED a certain amounts of times on and off repeatedly to create an LED flasher circuit. An arduino is a self-contained microcontroller. […]
Update: New interface – look at the last step. Credits: Arduino sensing done by DZL, Processing sketch and Instructable done by Mads Hobye. Disney Research lab designed a novel way to detect touch. You can see a video of their demo here: I had the honor to meet them at CHI2012 in Texas and I discussed with them […]
The DIY industry is booming, despite the desperate blackmailing of society by finance capitalists. Companies like Adafruit and Makerbot are grossing well over a million dollars a year, and Evil Mad Science Laboratories just recently dedicated themselves to running a full-time kit business. Making kits is fun, but starting a business can be scary. If […]
I have an Arduino Uno connected to two IR transmitters and respective receivers. Basically, when one of the receivers detects a beam break, I have a strand of LEDs display a pattern. This all works in principle, but the problem is that when the IR transmitters and receivers are connected to the Arduino, the LEDs […]
