NO NEED TO WATCH YOUR TEA, THIS ROBOT DOES IT FOR YOU




For anyone who’s ever had to make their own tea, steeping it for the right amount of time can be a pain. That’s precisely the problem that the automatic tea brewing robot solves with its painless approach to brewing tea, built by Slovenian electrical engineering student [Kristjan Berce].

You can use the robot by setting a timer on the knob, at which point the robot raises it arm for the tea bag then dips in the water every 30 seconds until the time has passed. At the end of the timer, the bag is raised clear of the cup to end the brewing. It’s a remarkably simple design that almost evokes chindogu (the Japanese art of useless inventions) if not for the fact that the robot actually serves a useful purpose.




The components for 3D printing the robot are available online, consisting of a case, a container for the Arduino-powered electronics, the lever for holding the tea, and the gear that raises the lever up and down. The device also uses an integrated Li-Ion battery with an accessible charging port and integrated BMS. A 35BYJ46 stepper motor and ULN2003 driver are used to move the 3D printed mechanism. The device uses a potentiometer for setting the steeping time between 1 and 9 minutes, and there’s even a buzzer for indicating once the tea is done brewing.

The Gerber and Arduino code files are open-source for any hackers looking to make their own tea brewers; just take care they operate with “deadly punctuality”.

Source: NO NEED TO WATCH YOUR TEA, THIS ROBOT DOES IT FOR YOU

READ  ORIGIBOT2 Telepresence Robot Platform with Arm & Gripper




Leave a Comment

*
= 3 + 8

(Spamcheck Enabled)

Read previous post:
Turn-Signal-Biking-Jacket
Turn Signal Biking Jacket

This tutorial will show you how to build a jacket with turn signals that will let people know where you're...

Close
Scroll to top