The Achilles Heel of the Mikroelektronika Hexiwear is its charging: the charging and USB connector are only designed for a limited number of plug-unplug cycles, and it does not have a wireless charging capability like the Apple iWatch. Until now! I have built a DIY wireless charging system for the Hexiwear ? : Wireless Qi […]
Murata has released a new 3-axis inclination sensor with a tilt angle output and digital SPI interface. The SCL3300 series will be used in a variety of demanding applications including levelling, tilt sensing, machine control and structural health monitoring. Based on Murata’s proven 3D-MEMS sensing technology, the SCL3300-D01 is a 3-axis (XYZ) inclinometer with 4
3-axis inclinometer delivers digital true inclination angle output Continue Reading
By: Alex Danovich,President San Francisco Circuits We live in an exciting time where we see a resurgence in electronics as a hobby. Mass production has wiped out a generation or two of kids learning to build radios from scratch with their mom or dad. In the good old days, not sure when, you had companies
servo motor interfacing WITH 8051 MICROCONTROLLER: This article is about interfacing of servo motor with 8051 microcontroller. You will learn how to interface and control this motor using 8051 microcontroller. Servo motors are used in robotics, embedded systems and industries because they are very precise and reliable. They are used to operate remote control toy cars, airplanes or robots. Their motion
servo motor interfacing with 8051 using keil compiler Continue Reading
Today I will show a very simple ionization chamber that can detect radioactivity. I was able to detect with it ionizing radiation from a smoke detector (Am241 isotope). It’s also immune to electromagnetic interference (EMI) due to a good shielding. This device doesn’t explicitly use any power supply. It’s connected to a multimeter set to
Radioactivity detection using very simple ionization chamber Continue Reading
The new R&S NGE100B power supply series is particularly easy and safe to operate. The robust instruments have galvanically isolated channels and safety binding posts. The color-coding of the channels provides a quick overview. The power supplies are compact, quiet and can optionally be remotely controlled via WLAN, a unique feature for instruments in the under EUR 1000 price
Rohde & Schwarz optimizes power supplies for educational applications Continue Reading
DDC’s HSN-1000 radiation-hardened Hybrid Nuclear Event Detector (NED) senses ionizing radiation pulses generated by a nuclear event, such as the detonation of a nuclear weapon, and rapidly switches its output from the normal high state to a low state with a propagation delay time of less than 20ns. The active low Nuclear Event Detection signal
Today I am going to discuss how to make a very simple DIY Breathalyzer using Arduino UNO and few external components. Ana Carolina designed this project as an instructable in instructables.com. This is a low-cost project and a useful one too. If you have no idea about what breathalyzer is, let me explain briefly: A breathalyzer is a device
Not many people know, but in some smoke detectors, radioactive materials play an essential role. Today I will present one of those devices, and my -successful- attempt to reverse engineer it and get the circuit diagram. Those smoke detectors use a small amount of Americium-241 (chemical symbol: Am) obtained in nuclear reactors as a decay
Kontron’s pITX-iMX8M motherboard features NXP’s dual or quad core CPUs based on the Arm Cortex-A53 architecture with up to 1.5 GHz. The Cortex M4 coprocessor and full 4K UltraHD resolution make the board the perfect foundation for sophisticated applications. It offers enhanced connectivity through two Gigabit Ethernet interfaces as well as superior graphics performance. Thanks to its
KONTRON SBC PITX-IMX8M FOR 4K UHD GRAPHICS PERFORMANCE Continue Reading
