Most projects include at least one LED. Before soldering the LED, how can you determine if the color and brightness meets your needs? After that, how do you calculate the correct value resistor?
Many years ago, I built a handy compact LED testing tool based on the LM317L adjustable current regulator. (You’ll definitely want to click on that link before continuing with this article.) It ended up being one of the most useful tools. In fact, the LED tester sits on a shelf above my keyboard, because I use the tester almost as often as I use my multimeter.
The problem with my original LED test tool is that I need a multimeter to measure the voltage of the LED. And, then I need a spreadsheet to calculate the resistance needed for that LED voltage with a given circuit voltage.
So, I decided to make an improved LED tester with LCD display!
This new tester has the same instant current-limiting feature of the original, along with a display that shows:
- The voltage of the LED
- The current limit in milliamps (adjustable by a trimpot)
- The desired target voltage (also adjustable by a trimpot)
- The calculated resistor value
The adjustment trimpots are on the end of the tester. The trimpot with the thumb dial is to indicate the target circuit voltage (usually 5 V or 3.3 V). The other trimpot requires a screwdriver, because it controls current, which I usually want to keep at 20 mA.
A 9V battery sits beneath the main board. The total stack is relatively compact, but I am disappointed with the overall look. Maybe I’ll make an enclosed case and use surface-mount parts for the next revision.
Read more: LED Tester with LCD Display
