This project is inspired by the Indian moon mission Chandryaan-2 Which will take place in September 2019.This is a special mission because they are going to land on the spot where no one has every landed before.So to show my support i decided to build the actual rover based on the images of the rover
IOT Lunar Rover Raspberrypi+Arduino Continue Reading
This is a trap to capture the mice without hurting them, so you can release them outside. If the proximity sensor detects the mouse, the Servo motor will close the door. You will receive an instant message and/or an Email, to inform you that you captured a mouse. When you are not at home or
IoT Mouse-Friendly Live Trap Continue Reading
Here on instructables weather stations have already been introduced. They show the current air pressure, temperature and humidity. What they lacked so far was a presentation of the course within the last 1-2 days. This process would have the advantage that you can not only graphically read the current values but also at a glance,
In this instructable we will use a potentiometer on an Arduino Uno to control a MIDI CC in Ableton Live. A MIDI CC stands for Continuous Controller, i.e. a number in the range from 0 to 127 inclusive to modulate something with. In the youtube I made for this intro you can see and hear that we
Controlling a MIDI CC in Ableton Live With an Arduino Uno Continue Reading
So far, we have only built 3 LED cubes. Our first cube is a 4x4x4 LED cube and though we managed to successfully complete it without too much difficulty, we did not find much excitement and satisfaction experimenting with it. Next, we designed, created and built our second cube, an 8x8x8 LED cube driven using
JolliCube (8x8x8 LED Cube) With MD_Cubo Library Continue Reading
Today I’m going to teach you how you can build your own RGB LED Glasses very easily and cheapThis has always been one of my biggest dreams and it finally came true! A huge shout out to EasyEDA for the amazing PCB’s and personal support! 🙂 The parts you will need for this project are the following:
DIY | RGB LED Shades Controlled by Arduino Continue Reading
This simple system allows web based remote control of a swimming pool pump and heater, or any device that be switched with simple relays. It uses a Raspberry Pi as the main controller and web server. It also uses a remote thermometer run by an Arduino at the pool, powered by a battery and a
Web-Based Pool Controller W/ Raspberry Pi, Arduino, Xbee and Digital Thermometer Continue Reading
Masses if not all Arduino Experiments done my way,that being everyone carry’s out experiments different to the next person,as such this instructable will have alot of videos,and pictures as well as detailed descriptions of each experiment what I did how and why…. LARGE INSTRUCTABLE BE WARNED! (there are many arduino instructables on such things,however this will
Arduino Experiments (Supersize Instructable) Continue Reading
This simple project is intended to help you in answering the lifelong question “Does this battery have any juice left?”. Although popularity of single cell batteries (such as AA, AAA, C and D cell) is diminishing, there are still many small devices like TV remotes, flashlights, and other small portable electronics that run on these
Arduino Uno R3 Battery Tester Continue Reading
For a class assignment, I needed to make something fabric-based which took an Arduino, some programming, and at least two inputs and outputs. After sketching a few different ideas, I hit on this one: an electromagnetic glove for MagnetoGirl. It sprang to life for me, because magnetism is an invisible force which can seem magical.
Electromagnet Superhero Glove Continue Reading
