Thanks to Will Greiman’s Fat16 library for the Arduino, I finally got a useful version of this datalogger working! Here’s the schematic: And here’s the code. The code is highly configurable: it can save raw A/D values or converted values, it allows software-defined gain, it can collect for a set time or until user input,
Arduino datalogging accelerometer with Micro-SD storage Continue Reading
Introduction This project demonstrates an Arduino 328 driving an ILI9341 TFT LCD in Proteus. It is a clean microcontroller project for learning how a TFT display works with an AVR-based controller. The simulation shows text, lines, circles, filled shapes, colors, and vertical scrolling on a 240×320 TFT screen. It is useful for students, hobbyists, and
ILI9341 TFT LCD Demo using Arduino 328 with Proteus Simulation Continue Reading
Introduction The Zuno Line Follower is an Arduino-based robot project designed to follow a line using a Zumo-style robot model. This microcontroller project uses an Arduino Uno with a Zumo line sensor and motor drive system inside a Proteus simulation. The robot reads the position of the line, calculates how far it has drifted from
Zuno Line Follower using Arduino Uno with Proteus Simulation Continue Reading
Introduction This Arduino-STM32 Bluepill Button project is a simple and practical microcontroller project built around the STM32 BluePill board. It demonstrates how a push button can control LED outputs in an embedded system. The project is designed in Visual Designer for Arduino STM32 and tested as a Proteus simulation. It is useful for beginners who
Arduino-STM32 Bluepill Button using BluePill with Proteus Simulation Continue Reading
Introduction This project demonstrates the simple use of an ADS1110 16-bit ADC with an Arduino Uno in a Proteus simulation. It reads an adjustable voltage input and displays both the raw ADC value and the millivolt output on a UART terminal. This is a useful microcontroller project for learning how external ADC modules work in
Arduino ADS1110 16-bit ADC using Arduino Uno with Proteus Simulation Continue Reading
Introduction This Arduino RGB LED project uses an Arduino Uno with an Adafruit 16 Channel PWM Servo Shield in Proteus simulation to control 5 RGB LEDs with smooth lighting effects. It is a practical microcontroller project for learning PWM control in embedded systems and DIY electronics. Instead of simple ON and OFF output, the system
Adafruit 16 Channel PWM Servo Shield using Arduino Uno with Proteus Simulation Continue Reading
Introduction The Arduino MCP3208 12-bit ADC project is a simple but effective example of analog data acquisition using an external ADC. In this design, an Arduino Uno communicates with the MCP3208 12-bit ADC through SPI and reads multiple analog channels from the simulation inputs. The measured data is converted into voltage values and printed to
Arduino MCP32008 12bit ADC using Arduino Uno with Proteus Simulation Continue Reading
Introduction The Temperature Logging Appliance is a practical microcontroller project built around the Arduino Yun and tested in Proteus simulation. It is designed to read temperature values from a sensor, update the current reading, and store historical data for chart-based viewing. This makes it a useful example for anyone learning embedded systems, DIY electronics, and
Temperature Logging Appliance using Arduino Yun with Proteus Simulation Continue Reading
Introduction The Wi-Fi Turtle Control project is a modern microcontroller project that demonstrates how to control a robotic turtle remotely using a mobile device over Wi-Fi. Built using the Arduino Yun, this system integrates IoT functionality with real-time motor control in a Proteus simulation environment. This project is a great example of embedded systems and
Wi-Fi Turtle Control using Arduino Yun with Proteus Simulation Continue Reading
Introduction Building a microcontroller project like a weather station is one of the best ways to understand real-world embedded systems and IoT-based monitoring. This project demonstrates a Basic Weather Station using the Arduino Mega, simulated entirely in Proteus simulation software. The system collects environmental data such as temperature, humidity, pressure, wind speed, wind direction, and
Basic Weather Station using Arduino Mega with Proteus Simulation Continue Reading
