BLYST Nano – The finger-tip sized ARM Cortex-M4F module




The finger-tip sized ARM Cortex-M4F module with BT 5, BT Mesh, and 30 I/O

The arrival of Bluetooth 5 was a significant leap forward for the IoT developer community, especially with its new Bluetooth Mesh functionality, which connects more devices and more sensors. Nearly four billion devices are expected to be shipped with Bluetooth technology in 2018. Bluetooth is driving innovation and creating new markets for wireless audio, wearables, tracking assets, building automation, lighting, sensor farms, etc…

BLYST Nano – The finger-tip sized ARM Cortex-M4F module




With a design based on the Nordic nRF52832 SoC, combining a low power 64 MHz ARM Cortex-M4F and the 2.4 GHz radio in a single chip, the BLYST Nano SoM (System on Module) is the perfect way to catch this new Bluetooth IoT wave driven by both Bluetooth 5 and Bluetooth Mesh.

  • The BLYST Nano is low power and small enough, at 10 x 7 x 1.6 mm, for wearable and sensor applications.
  • With 30 programmable I/O pins, it’s versatile enough to fit any control and automation application.
  • With a hardware floating point unit, algorithms can be directly implemented on the device, allowing more realtime sensor fusion processing.
  • It is a complete System on Module with all required components (crystals, coils, DC/DC, etc.) built-in and ready to use. So you don’t need to take up more board space with add-on components needed to support a given module.

BLYST Nano Module Features

  • Built-in ceramic antenna
  • Built-in coils for low power DC/DC mode
  • Built-in 32 MHz & 32.768 MHz crystal for low power
  • Dimensions: 10 x 7 x 1.6 mm
  • No extra PCB spaces or any external components required on users’ application board
  • All I/O pins of the nRF52832 are exposed to pads around the edges of the module to take full advantage of the nRF52832 and for easy assembly without compromise
  • FCC & CE certified

Read more: BLYST Nano – The finger-tip sized ARM Cortex-M4F module




Leave a Comment

*
= 4 + 4

(Spamcheck Enabled)

Read previous post:
UCL-Embedded-Arduino-Door-Lock
UCL-Embedded – Arduino Door Lock

This project was created by Daniel Månsson [], Flemming Andersen [flem781a] and Mikkel Pavia [mikk24b9] as an exam project at...

Close
Scroll to top