A levitating little Death Star in Instructables invited me to the new project with Arduino. Three policies were decided and kept to differentiate it from the forerunner. Do it myself with no (or less) ready-made. Keep rotating. Make glow and blink without battery. VIDEO(1): A Levitating Sphere Rotates Glows and Blinks The detail of the project […]
Putting a tablet in car dash.This project was on my mind for a long time.Somehow I couldn’t find any free time to build this project. But now I have done it and I’ll tell you how. My car is a VW Polo (2014 ) and don’t have any bluetooth connectivity with smartphones or so. And […]
This is a guide to using the motors and sensors from the LEGO NXT set with a Parallax Basic Stamp II or BS2. However, rather than just providing schematics and sample code for the BS2, I’ll be providing some theory on how the sensors work as well. This way, someone using an arduino or other […]
In this tutorial, I will demonstrate how to create a mosquito repellent device with the help of an Arduino. The repellent comes in a shield form that can be connected to the Arduino board, allowing for easy modification of its frequency. This project is perfect for camping and hiking outdoor activities, as it emits a […]
Hello Makers out there Again this is not a Step by step Instructable . Like always i forgot to take take snaps since the inception of this project.The idea of Building a community weather station using Open hardware Kicked a long back. We people from a local DIY community build this weather station. In our […]
Mood lamps are always fascinating for me and is a very good project for starters to start with Arduino. What is a Mood Lamp ? Mood lamps are lighting devices that are used to establish a particular feeling or mood within a room. In some cases, this type of lamp may be a small device […]
Video of the working device Trying to build a cheap Arduino Data Glasses for everybody. Why? I just wanted one. It’s working, and now it can even help to avoid accidents. From the first idea to the working prototype, it took 4 Month The challenge was, that It should be constructed out of common materials […]
Hi there I’ve been here after a long time, and this time I’ve made a huge project as compared to my earlier ones. This is a full-sized 250 mm X 300 mm work area CNC machine and more interesting things is that it was made in 60$ only. I got some time in my summer […]
Every curious how DVDs work? Interested in learning some simple analog electronics? This Instructables will show you how to make an optical disk display project in only a few hours. What is an optical disk? An optical disk stores data/information and can be read or displayed using light. You will learn about basic analog electronics, […]
Working with conductive fabric is fun and it’s ideal for wearables, soft circuitry, e-textiles and other projects that take advantage of it’s properties. Learning the basics will help you make design and material choices tailored to your application. This Instructable is jam-packed with insights from using it over the years as well as favorite resources […]
