Home > Projects > Other Projects > 3D Printed Arduino RC Airboat With Controller

3D Printed Arduino RC Airboat With Controller

Friday February 28, 2020 / Tismail
Categories: Other Projects
Tags: 3d, airboat, printer
Contents hide
1 Summary of 3D Printed Arduino RC Airboat With Controller
2 Step 1: Supplies
3 Step 2: Print the Parts
4 Quick Solutions to Questions related to RC Airboat:

Summary of 3D Printed Arduino RC Airboat With Controller


This project guides beginners in building a remote-controlled (RC) airboat using 3D printing and Arduino technology. It details the assembly of both the boat and its wireless controller, utilizing electronic components like motor drivers, sensors, and transceivers alongside custom-printed physical parts such as the hull, propellers, and cases.

Parts used in the RC Airboat:

  • Arduino Nano
  • Mini Breadboard
  • L298N Motor Driver
  • DC Motor
  • SG90 Servo Motor
  • NRF24L01 Module Wireless Transceiver
  • LiPo battery
  • Jumper Wires
  • Joystick Module for Arduino
  • Rotary Potentiometer
  • Toggle Switch
  • 6V AA Battery Holder
  • 1.5V AA Battery
  • M3 screws 6mm in length
  • Controller Case
  • Controller Cover
  • Boat Hull
  • Mast
  • Fin
  • Propeller Hub
  • Propeller with n4415(clockwise)
  • Propeller with n4415(counterclockwise)

This is a project that combines the knowledge of 3D printing and Arduino. It is a good beginners project for anyone interested in making their own RC boat or just interested in using 3D printing and Arduino for their own creations.

Supplies:

Look at step 1 for Supplies

Step 1: Supplies

Electronic components needed for the Airboat:

Electronic components needed for the controller:

For the physical part of this project like the hull of the boat, case of the controller and propeller…etc. You will need a 3D printer or access to 3D printer to print these part.(The photo only include some of the components)

Step 2: Print the Parts

Number of prints:

  • 1x Controller Case
  • 1x Controller Cover
  • 1x Boat Hull
  • 1x Mast
  • 1x Fin
  • 2x Propeller Hub
  • 3x Propeller with n4415(clockwise)
  • 3x Propeller with n4415(counterclockwise)

Please print them separately except the propeller parts you can print them all in one go. Also, remember printing orientation matter find the best orientation for your 3D printer to print on.

Read more: 3D Printed Arduino RC Airboat With Controller

Quick Solutions to Questions related to RC Airboat:

  • What is this project suitable for?
    This is a good beginners project for anyone interested in making their own RC boat or just interested in using 3D printing and Arduino for their own creations.
  • How many DC Motors are needed for the Airboat?
    The supplies list specifies that you need 2x DC Motors for the Airboat.
  • Can I print all propeller parts at once?
    You can print the propeller parts all in one go, but you must print them separately except for these parts.
  • Does the orientation matter when printing?
    Yes, remember printing orientation matters find the best orientation for your 3D printer to print on.
  • What type of batteries power the controller?
    The controller uses a 6V AA Battery Holder and 4x 1.5V AA Batteries.
  • Which module handles wireless communication?
    The NRF24L01 Module Wireless Transceiver is used for wireless communication between the boat and controller.
  • How many clockwise propellers are required?
    The project requires 3x Propeller with n4415(clockwise).
  • What physical parts require a 3D printer?
    You will need a 3D printer to print the hull of the boat, case of the controller, and propeller.

About The Author

Scroll to Top