My Ninth Project: Robot Arm with Joystick Shield using Arduino

Although it is great controlling the robot arm with computer or mobile phone, I think using joystick is also cool, so I’ve bought a joystick shield and make a new project. This joystick shield is compatible with Arduino. It also support Nokia 5110 LCD module, nRF24L01 wireless module and Bluetooth module. It should be fun and convenient for various projects. : )

My Ninth Project - Robot Arm with Joystick Shield using Arduino

Step 1: Parts

Joystick Shield

Robot Arm Set

16-Channel Servo Controller

Arduino UNO

Buck Regulator with Indicator

7.4V Li-Po Battery

Charger

JST female connector

Standoff

Step 2: Assembly

For assembling Robot Arm Set you can follow the manual downloaded from the link. You can also refer to my seventh project. For Joystick Shield it is very simple: There are pin headers that are compatible with Arduino, just plug this shield to the pins on Arduino UNO / MEGA and that’s it.

My Ninth Project - Robot Arm with Joystick Shield using Arduino circuit

Step 3: Wiring

This is a continuation of the seventh project and the wiring between robot arm and servo controller is just the same.

For servo cable:

Brown = GND

Red = +

Orange = Signal

From servos to servo controller:

Servo at the base > S1

……

Servo at the claw > S6

Use extension wires if the servo cable is not long enough. Make sure all the cables are in correct direction.

For Battery:

Red wire of 7.4V Li-Po Battery > IN + of buck regulator

Black wire of 7.4V Li-Po Battery > IN – of buck regulator

For Buck Regulator

OUT + > VS of the blue terminal block on servo controller

OUT – > GND of the blue terminal block on servo controller

From servo controller to Joystick Shield

Pin GND > – on Joystick Shield

Pin 5V > + on Joystick Shield

RXD > Pin 0 on Joystick Shield

TXD > Pin 1 on Joystick Shield

 

For more detail: My Ninth Project: Robot Arm with Joystick Shield using Arduino


About The Author

Ibrar Ayyub

I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough research and presenting information in a structured and logical format.

Follow Us:
LinkedinTwitter

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top