**DISCLAIMER** I do not and will not take responsibility for anyone who gets in trouble for this, by either imitating emergency personnel, or using without a permit/lisence. Updates! -I have shortened the code -Changed 16 LED's to 8 -Changed/added more flash patterns -Renamed variables As promised, this is the ATMega 2650 version of the police lights I originally did on my Duemilanove. What you will need: 4 ...

This was one of the first programs i wrote for the arduino after having it a few days :) we will be making l.e.d police lights with minimal materials Step 1: You will need. You will need Arduino (or suitable clone) Breadboard 2x 240ohm resistors 1x Clear Red l.e.d 1x Clear Blue l.e.d Some Jumper Cables Step 2: Place Components Onto Breadboard Place the components onto the breadboard as the diagram shows Ste ...

Arduino Police Strobe Light effect, another simple variation of blink code. Arduino Police Strobe Light effect, another simple variation of blink code. Parts List; 1) 2x 5mm red LED 2) 2x 5mm blue LED 3) 1x Arduino 4) 4x 330Ω resistor 5) 1x 10kΩ potentiometer 6) Jumper wire Instruction; 1) Connect all LED as diagram below, make sure cathode lead of LED at ground wire. 2) Connect all 330Ω resistor to anode l ...