This project is a platform for drinking water monitoring and analytics, consists of IoT device, cloud, and mobile and web app. Things used in this project Hardware components Arduino MKR1000 × 1 PCF8574 × 1 AC-DC Module 5V 500mA × 1 10 Segment LED Bar Graph (Red) × 1 Resistor 100 ohm × 11 Resistor
Project “Gallon” – Smart Drinking Water Monitoring Platform Continue Reading
A stepper motor shakes a limb to frighten away birds and squirrels. It is under the control of the MKR1000. Things used in this project Hardware components DC motor (generic) × 1 Arduino MKR1000 × 1 Story The project uses a stepper motor to pull down on a fig tree limb to frighten away birds
Metal Detector is a security device which is used for detecting metals which can be harmful, at various places like Airports, shopping malls, cinemas etc. Previously we have made a very simple Metal detector without a microcontroller, now we are building the Metal Detector using Arduino. In this project, we are going to use a
Arduino Metal Detector Continue Reading
Since you lacked the USB interface in your own Arduino board, it becomes necessary to use a homemade/ready-made USB to Serial Converter Module as an efficient and economical solution. Inexpensive and easy-to-use USB to Serial Converter modules are now widely available, such as one shown here. With the help of this little module you can
Bootload an ATmega Microcontroller & Build Your Own Arduino – 2 Continue Reading
I have a device which provides a USB port. If I attach it to a Windows PC it is recognized as a “CP2103 USB to UART Bridge Controller”. According to the device documentation, it should communicate in serial format at 38400bps.I have to talk to this device with a atmega microcontroller. Since the USB pinout
An h-bridge is a chip that allows DC motors to be run versatile, with bidirectional capability. With an H-bridge, motors can go forward or backward, left or right, up or down, etc, depending on the use of the motor(s) in the circuit. Without a microcontroller, the only way to be able to control an H-bridge
How to Build an H-bridge Circuit with an Arduino Microcontroller Continue Reading
This project uses just three main components to provide forward and reverse control for a single motor. You can easily interface it to an Arduino or any other microcontroller. It’s so simple – you can wire it up “free-form” without a circuit board in about 15 minutes. Features: All parts available at Radio Shack for
Easy, Reversible Motor Control for Arduino (or any Microcontroller) using arduino Continue Reading
Different kinds of computers are designed for different purposes. The computer at the heart of your laptop is optimized for different puprposes than the one in your phone or the one in your mouse. The simplest computers are those that are designed to take inout from the phyiscal world and control output devices in the
Microcontrollers: The Basics Continue Reading
