If you want to keep your badminton game at its peak, you’ll need a good racket with a proper set of strings. When an injury kept [Antonie Colin] off the court for a few months, building a restringing machine helped pass the time. The design is straightforward, using commonly-available motion components and 3D-printed parts. The round […]
BADMINTON STRING WINDER GETS THE TENSION JUST RIGHT Continue Reading
If you are searching for a quick yet fantastic little project to keep you busy you might be interested in this fantastic Arduino Nano ESP32 based color handheld console created by the Volos Projects YouTube channel. The tiny handheld console features a round display and is powered by an Arduino Nano ESP32. Volos Projects, a
Arduino Nano ESP32 handheld console with round color display Continue Reading
The 433 MHz spectrum is a little bit of an oddball.Outside of the US, it’s an open playground for devices that adhere to the power restrictions and other guidelines about best practices. IoT devices operate here, as well as security systems and, of course, remote controls. And, using a few off-the-shelf parts [hesam.moshiri] shows us
RF REMOTE MADE EASY Continue Reading
Summary The issue of poor air quality is a significant concern that impacts the well-being of numerous communities, particularly individuals with health conditions. The ability to measure air quality accurately is of utmost importance. In this module, you will have the opportunity to construct a basic air quality sensor using affordable and easily accessible components.
Arduino Air Quality Sensor Continue Reading
I’ve been working on a project that used a 16×2 LCD display and wanted a nice finish that also allowed me to seal against water and other liquids. I also needed impact resistance, low cost and the ability to be changed easily if worn or broken. I considered many different ideas:- 1) A full sheet
Home Made Bezel / Window for LCD, LED, TFT Displays. Continue Reading
In this short tutorial we make an Arduino LCD shield. Updated 18/03/2013 Today we are going to make an Arduino shield with an LCD module. More often than not I have needed to use an LCD shield in one of my projects, or with the Arduino tutorials. Naturally you can buy a pre-made one, however
Make an Arduino LCD shield Continue Reading
Displays are always nice. So far I’ve just been demonstrating how to use 7-segmented displays to display numbers using very few resources. But what if you want to display text? Or pictures? Or both? Well in order to do that, you’re going to need a simple LCD screen. Now there are simple led screens out
Arduino powered GLCD (Graphic LCD) Continue Reading
Recently my wife has suggested that I should lose a few pounds in weight (too much time geeking out and not enough time in the gym). With that in mind -and in true nerd fashion- I wanted to create a method to see my progress, as well as having a constant reminder to stick to
IOT BMI Indicator and Mood Light Using Feather Huzzah and IFTTT Continue Reading
In this Instructables, you will see how to Interface Moisture sensor to your NodeMCU. And check the moisture value and the same to be displayed on the LCD. We’ll use Liquid Clear Crystal to display the moisture value. This 16×2 LCD is very popular and broadly used in electronics projects as they are good for displaying information like sensor data from your
Moisture Control Unit – MCU Continue Reading
Using an Arduino, it is easy to make a speedometer/tachometer for virtually any man-powered vehicle. I made one for my skateboard that used a small magnet to count revolutions and utilized an LCD display screen. This Instructable will show you how you can do the same step by step. You will need a few things
Arduino Skateboard Speedometer Continue Reading
