A simple IoT experiment, using an Arduino MKR1000 board to monitor a potentiometer and DHT11 sensor via Favoriot IoT platform. Things used in this project Hardware components Arduino MKR1000 × 1 DHT11 Temperature & Humidity Sensor (4 pins) × 1 Rotary potentiometer (generic) × 1 Breadboard (generic) × 1 Jumper wires (generic) × 8 Software […]
Arduino MKR1000 & Favoriot Read More »
Sending temperature and humidity from Arduino MKR1000 to Artik Cloud Things used in this project Hardware components Arduino MKR1000 × 1 DHT11 Temperature & Humidity Sensor (4 pins) × 1 Software apps and online services Samsung ARTIK Cloud for IoT Arduino IDE Story Background This article describe how to use REST for sending data from
Arduino MKR1000 – DHT – Artik cloud Read More »
A fairly simple project that attaches everyone’s favorite environmental monitor, the DHT, to the Arduino MKR1000 then transmits sensor data. Things used in this project Hardware components DHT11 Temperature & Humidity Sensor (4 pins) Arduino MKR1000 Story I had already developed code for the ESP8266 12-E to have environmental sensor data, taken by the DHT11,
MKR1000 to ThingSpeak.com Read More »
This demonstrates how to use your Arduino MKR1000 to connect to InitialState.com to produce colorful visualizations of your sensor data. Things used in this project Hardware components Arduino MKR1000 × 1 DHT11 Temperature & Humidity Sensor (4 pins) × 1 Breadboard (generic) × 1 Jumper wires (generic) × 1 USB-A to Micro-USB Cable × 1
MKR1000 to Initial State DHT Visulaizations Read More »
