connector

TECHNEXION XORE IS A TINY NXP I.MX 8M MINI LGA SYSTEM ON MODULE

TECHNEXION XORE IS A TINY NXP I.MX 8M MINI LGA SYSTEM-ON-MODULE

There are several ways to design a system-on-module to carrier board interface, one method is to design an LGA (Land Grid Array) module, which have to be soldered straight unto the carrier board, and enables much more compact system-on-modules, and that’s exacty what TechNexion has done with their XORE family of LGA system-on-module currently powered […]

TECHNEXION XORE IS A TINY NXP I.MX 8M MINI LGA SYSTEM-ON-MODULE Read More »

FISCHER FREEDOM’S MAJOR EXTENSIONS ENABLE VERSATILE INNOVATIONS IN CONNECTIVITY

FISCHER FREEDOM’S MAJOR EXTENSIONS ENABLE VERSATILE INNOVATIONS IN CONNECTIVITY

Nine new products now add to the capability of the Fischer FreedomTM Series to serve as a technology platform in connectivity setting new standards in usability, integration capability and versatility. An innovation enabler in application design, particularly in terms of SWaP (Size, Weight and Power) requirements, cable management optimization, electronic network integration and wearable technology.

FISCHER FREEDOM’S MAJOR EXTENSIONS ENABLE VERSATILE INNOVATIONS IN CONNECTIVITY Read More »

NEXT GENERATION IOT WIRELESS MODULES ACCELERATE DEVELOPMENT

NEXT-GENERATION IOT WIRELESS MODULES ACCELERATE DEVELOPMENT

Radio modules using STMicroelectronics’ STM32WB55 wireless microcontroller are available from Arrow Electronics. The Sharky modules were co-developed with Italian designer, Midatronics. By Caroline Hayes The microcontroller integrates a 2.4GHz RF transceiver supporting Bluetooth 5 (including Bluetooth Low Energy), Thread, and ZigBee stacks. Its dual Arm Cortex-M core architecture enables real-time secure application performance running on the 64MHz Cortex-M4F core, and concurrently manages the radio subsystem and

NEXT-GENERATION IOT WIRELESS MODULES ACCELERATE DEVELOPMENT Read More »

Inkplate 6PLUS Wi Fi e paper display passes funding goal

Inkplate 6PLUS Wi-Fi e-paper display passes funding goal

Following on from the original successfully launched Inkplate, the Crowd Supply Inkplate 6PLUS Wi-Fi e-paper display campaign has now successfully passed its required pledge goal raising over $16,000 thanks to over 60 backers with still 20 days remaining. The newly updated Inkplate 6PLUS features wireless connectivity, a touchscreen and front lighting and is now available via

Inkplate 6PLUS Wi-Fi e-paper display passes funding goal Read More »

PROGRAMMABLE USB HUB WILL SOON LAUNCH ON CROWDSUPPLY

PROGRAMMABLE USB HUB WILL SOON LAUNCH ON CROWDSUPPLY

A USB hub that’s also a dev board and an I2C, GPIO, and SPI bridge. In Addition To Being A 4-Port USB 2 High-Speed Hub, This Programmable USB Hub Is Also: A CircuitPython based development board. A bridge between your computer and I2C (via Sparkfun Qwiic connectors), GPIO, and SPI (via its mikroBUSheader). A power supply, providing 6 A of

PROGRAMMABLE USB HUB WILL SOON LAUNCH ON CROWDSUPPLY Read More »

Scroll to Top